Fused Deposition Modeling ABS Medical ABS Medical created for use in the medical field and made using innovative FDM technologies in the room at a controlled temperature, satisfies the need for a material with the highest health certifications, which can be used in medical contexts. Material properties Density ISO 1183 Suitability for food contact Tensile strength ISO 527 Vicat softening ISO 306 temperature Flammability UL94 Printing layer height 0,15 mm (0,006 in) Maximum dimensions 300x300x400 mm (11.8x11.8x15.7 in) Infill 30% Shell thickness 1,8 mm (0,07 in) Tolerances ± 0,50mm < 100mm / ± 0,6% > 100mm Applications ABS is used extensively in various sectors such as the automotive and consumer goods industries due to an attractive mix of mechanical properties, ductility and temperature resistance. This material has been developed, tested and certified by our R&D department for skin compatibility and as a medical device in the most diverse applications. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Weerg. Technical datasheet v2.0 (last review 07/09/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.