Spektron UV Series SHINING NEW LIGHT ON DRINKING WATER DISINFECTION

Let’s disinfect drinking water, no matter what. Featuring highly efficient UV lamps and advanced flow distribution technology, the Spektron series is a cost effective, reliable solution for drinking water plants. » Wide array of applications from domestic water supply and industrial uses to large municipal water plants with a capacity of more than 4,000 m3/h (25 MGD) per unit » Certified and validated disinfection performance according to Austrian ÖNORM, German DVGW directives, and US EPA´s UV Disinfection Guidance Manual (UVDGM) lamps and ballasts and OptiDose UV dose pacing for Spektron ‘e’...

Wedeco Ecoray technology Wedeco Ecoray technology perfectly matches UV lamps and ballast to deliver the highest efficiency, longer lamp life, shorter warm-up time and excellent dimming mode properties to the job. Ecoray lamp and ballast technology gives higher relative UVC output than conventional low-pressure, amalgam UV lamps when operated in dimmed mode. By automatically dimming the lamps to match the dosage you need, you save The Ecoray 600 watt (W) lamps offer the additional benefit of reduced lamp count by up to 60 percent, resulting in low life cycle costs and easy maintenance. Thanks...

Irradiation chamber The UV lamps are installed parallel to the flow in quartz glass tubes. The water runs past the quartz tubing and is irradiated by the UV light. Multiple flange options make the systems a good fit for a wide range of flow rates and installation requirements. Leading sensor technology The UV performance is continuously monitored by an ONORM compliant UV sensor that fulfils reference sensor requirements. The sensor also contributes to the OptiDose UV dose pacing which modulates UV lamp output to the actual level needed to meet the UV dose required (option for Spektron 'e' units)....

Ballast and control cabinet The control cabinet houses the ballast cards and monitoring and control features. Customer interface signals allow for remote diagnostics and control. Spektron units are equipped with the unique EcoTouch controller featuring an easy-to-use operator touch panel that unifies all sensor signals, SCADA connectivity, and OptiDose closed loop control to maximize operator usability. Optimized hydraulics for every installation Optimal disinfection results require uniform velocities throughout the reactor chamber. The Wedeco flow distribution concept is the result of intensive...

Maximum flow rate (m3/h / MGD) * DVGW certification ONORM certified & validated UVDGM validated UV System Control Cabinet Vessel dimensions are approximate and will differ depending on flange size * Additional pressures available

Spektron Industrial UV Lamps and Monitoring System UV System Control Cabinet Know-how in treatment technology. You can rely on the know-how of our engineers and technicians to help you choose the right system for your needs. All recommendations for the design of your system are based on many years of experience and complex calculation methods, and take account of local validation and certification standards. Our broad knowledge and unrivalled expertise in the field of disinfection along with our full range of highly developed Wedeco UV disinfection systems make Xylem a reliable partner for the...

xylem.com All information presented herein is believed reliable and in accordance with accepted engineering practices. Xylem makes no warranties as to the completeness of this information. Users are responsible for evaluating individual product suitability for specific applications. Xylem assumes no liability whatsoever for any special, indirect or consequential damages arising from the sale, resale or misuse of its products. Subject to change without notice. Disinfection performance will vary based on product, system design, facility operating conditions, water quality, and maintenance protocols....