SSF-800

SSF-800

SSF-800

Product catalog summary
Introduction
The SSF-800 is a remote-controlled robot designed for skimming slow sand filters without the need to empty them. It effectively removes the schmutzdecke layer and pumps it to a designated landfill, with a cleaning capacity of 60-150 square meters per hour. This method is also applicable to facilities with infiltration ponds.

Advantages
  • Environmentally friendly with no emissions during cleaning.
  • Reduces downtime as the filter does not need to be emptied of water.
  • Minimizes risk to microflora by avoiding filter drying.
  • Uses food-approved oils.
  • Suitable for industrial heavy-duty cleaning.

Product Description
The SSF-800 is user-friendly, requiring only one operator. It can be equipped with cameras and lamps for enhanced remote operation. The robot reduces cleaning costs and maintains water distribution without disruption. It operates solely on electrical motors, avoiding harmful oils or chemicals.

Technical Specifications
  • Dimensions: 120 x 115 x 90 cm
  • Suction width: 120 cm
  • Weight: From 150 kg
  • Drive unit: 2 electric motors, track drive
  • Nozzle: Adjustable height with screw or brushes
  • Pump capacity: 1200-2000 L/min
  • Pump effect: 2.8-15 kW
  • Speed: Adjustable 0-3 m/min
  • Power source: 3-phase, 400 V, 50 Hz
  • Operating voltage: 400 V
  • Total effect: 3-16 kW
  • Umbilical cable length: 2 x 50 m
  • Land cable: 1-20 m

Optional Equipment
  • Camera with lamp
  • Cable extension 50m
  • Speed control: 0-0.3 m/s
  • Pump: 2.8 kW
  • Radio remote control with joysticks
  • Trolley

Contact Information
Web: www.wedarobotics.com
Email: [email protected]
Tel: +46 8 550 325 50
Address: Wedavägen 4A, 152 42, Södertälje, Sweden

Origin
Made in Sweden
See more

Catalog excerpts

SSF-800-1

Industrial heavy-duty cleaning Skimming of slow sand filters without emptying has long been a request from the water market. It is a remote-controlled robot that can run on the sand bed and remove the so-called schmutzdecke and pump it to the desired landfill. The machine sucks in 13 cm of schmutzdecke and the sand that is pumped out of the slow filter. The method also works on facilities with infiltration ponds. The estimated cleaning capacity is 60-150 square meters per hour. The advantages of our method of cleaning: • Environmentally friendly - no emissions during cleaning • The filter does not need to be emptied of water - the time • The filter needs to be taken out of operation and is radically reduced • Reduced risk of affecting the microflora because the filter is not dried One operator easily handles the SSF-800. It can be equipped with cameras and lamps to facilitate remote operation from a maintenance vehicle or a control room. It decreases the cleaning costs and does not disturb the water distribution. SSF-800 has only electrical motors and uses no dangerous oils or chemicals that may damage the reservoir. With a robot in place, the skimming can be done directly if necessary and possibly more often than today, to ensure the supply of drinking water Web: www.wedarobotics.com mail: [email protected] MADE IN SWEDEN

 Open the catalog to page 1
SSF-800-2

Technical data Suction width Standard equipment • Radio Remote control with joysticks Optional eqipment • Camera with lamp CONTACT Drive unit Pump capacity Pump effect Power source Operating voltage Total effect Umbilical cable length Land cable Suction width Adjustable height fro surface with screw or brushess Web: www.wedarobotics.com mail: [email protected] MADE IN SWEDEN

 Open the catalog to page 2

All Weda Robotics catalogs and technical brochures

  1. U-DEC

    2  Pages

  2. W-2000

    2  Pages

  3. W-50

    2  Pages

  4. B-600

    2  Pages

  5. VR-600

    2  Pages

  6. VR-50

    2  Pages

  7. YT-600

    2  Pages

  8. YT-800

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.