HPM7000Hydraulic Data Logger
3Pages

Hydraulic Data Logger The HPM7000 series, is a highly versatile portable hydraulic data logger and the evolution of the HPM6000. It is ideal for diagnostic testing of hydraulic systems, use on hydraulic test benches, pre-dispatch inspection or for Research and Development (R&D). There are a variety of different data logging modes with the ability to data log up to 16 million measured values per test at a variable interval from 1 ms, with a total possible storage size of 12GB (approx. 250 measurements). The base model: enables you to simultaneously connect up to 48 Webtec CAN sensors. Alternatively, up to 5 External CANOpen sensors can be connected. Two frequency inputs or Digital Input/ Digital Output are also possible thanks to a dual-function connector. Modular upgrades: The HPM7000 features a unique modular system which means two input Modules can be added or changed by the user, allowing you to upgrade the device over time to meet the needs of the most demanding application. The CAN Input Module: allows the connection of up to 48 CAN, CANOpen, J1939 or any mixture of several CAN protocols in a passive way (no power is supplied to the sensors from this module). This allows the user to ‘listen’ to the other CAN signals travelling on a bus, without disturbing them. The Analogue Input Module: enables back compatibility with sensors that have Sensor Recognition (SR). It also enables connection to current (e.g. 0-20 mA or 4-20 mA) and/or voltage (e.g. 0-5, 0-10 V) sensors. The 7-inch colour touch display is suitable to use with gloves and additional large tactile buttons at the right of the screen ensure operation even in adverse conditions. The screen can be configured to display the readings in numerical, bar graph, dials and graphical display mode. Analysis of measurements: can be done thanks to two cursors that can be inserted to obtain measured and delta values. All data can be exported to a PC running HPMComm 7.5 for further analysis or storage off the unit. Connecting to a PC: USB slave and USB host allow the unit to stream to a PC or laptop and allow for the connection of additional storage. The HPM7000 can also be controlled and monitored remotely using the LAN connection and a VNC remote desktop application which runs on a PC. The HPM7000 is loaded with technology, yet is simple to configure and easy to use Specifications Ambient Temperature: -10 to 50 °C, 14 to 122 °F Memory: 12GB Ports: USB device (data transmission between device and PC) USB host 1 (connection with external storage media) USB host 2 (connection with external storage media) LAN (connection with network cable) Material: Body materials: ABS/PC (thermoplastic) Body Protective Materials: TPE (thermoplastic elastomer) Weight: 1.88 kg, 4.1 lb (without input modules) Mounting: Carrying Strap, Folding Stand and VESA standard 100 x 100 mm / M4 metric Electrical IP Rating: Battery: External Power Supply: Connector Type: ● Complete range of sensors pressure, flow, temperature, RPM, contamination. ● Webtec CAN sensors for plug and play functionality ● Third Party CAN sensors (External CAN) can be displayed and logged. A CAN Monitor assists during installation of CAN channels and analysis of the CAN bus. ● Two slots for Input Modules (CAN/J1939 and Analogue) are availabe on the Base Model. These can be added/ changed by the user. ● IP65 and rubberised case surround for protection in harsh evironments ● Complete with HPMComm 7.5 - PC software. Connectivity USB, Ethernet. ● Illuminated and anti-glare, 7 inch touch screen colour display. ● Foldable stand and VESAstandard points on the back for wall mounting on fix installations (e.g. Test Benches)

Ordering Codes MODEL NUMBER PART TYPE Measuring Device Base model without input modules. 2 CAN bus networks, 24 Webtec CAN bus sensors each. Alternative at CAN Y up to 5 external CANopen sensors. Dual-function input (D-IN/D-OUT or Frequency). Input Module CAN input module. 2 CAN bus networks, 24 CAN bus sensors each for connection with CAN (CAN 2.0 A, CAN 2.0 B) systems like CANopen, CAN generic and SAE-J1939. Input Module Analogue input module. 3 SR sensors ( up to 6 channels), 2 configurable auxiliary inputs Additional Specification/Functional Specification Input/Output Base Model CAN...

PC Software HPMComm7.5 ● Compatible with Windows 10 (32- and 64-bit) ● Zoom functions ● Conjunction of measurement curves ● Cursor functions ● Export function ● Extensive filter function ● Remote connection/remote control of the HPM7000 ● Freely definable calculation channels ● Online measurement ● Easy operation The recorded curves can be represented in a diagram. Shifting of the curves allows for accurate analysis of the hydraulics. A performance curve can be created to evaluate a pump. Pressure losses and leaks are detected by generating the difference values of pressure curves. With the...