HPM6000 Hydraulic data logger
1 / 2Pages

Hydraulic data logger Up to l 32 Intelligent Digital channels l 16 analogue channels l 4 million readings per test The HPM6000 series is a highly-versatile portable hydraulic data logger, ideal for diagnostic testing hydraulic systems, or for use on hydraulic test benches. Three models allow configuration to meet the needs of the most demanding application, enabling you to simultaneously connect between 16 and 26 different hydraulic sensors. The base model is configured for use with the full range of Intelligent Digital (ID) sensors, using the CAN protocol, while the other two models also allow for connection of Sensor Recognition (SR), current and voltage sensors. The ID sensors are connected in-line with one another, so saving on cabling and are uniquely identified on the HPM6000. The 5.7 inch colour display can be configured to display the readings in numerical, bar graph, dials and graphical display mode. There are a variety of different data logging modes with the ability to data log up to 4 million measured values per test at a variable interval from 1 ms to 24 hours, with a total possible storage size in excess of 1 billion values. All data can be exported to a PC running HPMComm 7.0 for further analysis or storage off the unit. The HPM6000 series connectivity is the same across the whole range - USB slave and USB host allow the unit to stream to a PC or laptop and allow for the connection of additional storage up to 40 GB. The Ethernet port enables remote monitoring over a network if required. The HPM6000 is loaded with technology, yet is simple to configure and easy to use. Milwaukee, WI 53235, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400 sales-uk@webtec.com Features l Complete range of sensors – pressure, flow, temperature, tachometer l Intelligent digital sensors (CAN protocol) for easier wiring and auto configuration l Analogue sensor inputs (HPM6116, HPM6216) including HPM-SR range, mA, volts l Internal storage for over 36 million readings – expandable to over 1 billion readings l Logging interval of 1 ms to 24 hours l Re-chargeable internal battery – mains charger included l Full colour 5.7 inch display l IP64 and rubberised case surround for protection in harsh environments l Complete with HPComm version 7 – PC software l Connectivity – USB Host, USB slave, Ethernet Hydraulic measurement and control

Specifications Model number Intelligent Digital inputs (CAN) Analogue input channel 2 lines - max of 8 sensors per line, 16 sensors in total (up to 32 channels) 2 lines - max of 8 sensors per line, 16 sensors in total (up to 32 channels) 3 SR sensors ( up to 6 channels) 2 configurable auxiliary inputs 2 lines - max of 8 sensors per line, 16 sensors in total (up to 32 channels) 6 SR sensors ( up to 12 channels) 4 configurable auxiliary inputs Note: Some sensors, such as the PTT pressure transducers that include a temperature sensor built-in, are one sensor that uses two channels. Functional...