Turbine flow meters with conditioned output Up to l 1500 lpm, 400 US gpm l 480 bar, 7000 psi Output Options l 4 - 20 mA, 0 - 5 V The CT turbine flow meter with conditioned output provides a complete solution to the flow measurement of hydraulic systems on test stands, machine tools and other fixed or mobile applications. The flow meter can be installed anywhere in the hydraulic circuit for production testing, commissioning, development testing and analysis of control systems. The compact design allows the CT series flow meters to be installed where space is limited. The CT turbine flow meter has a built-in micro-controller that conditions the signal from the flow meter to provide an accurate analogue output. This enables you to connect the flowmeter directly into your digital display, PLC or custom DAQ system without having to worry about complex calibration factors or lookup tables. Two versions are available offering 4 - 20 mA current loop or 0 - 5 V. The CT flowmeter is the ideal tool for monitoring the performance of pumps, motors, valves and hydrostatic transmissions. Milwaukee, WI 53235, USA Tel: +1 (414) 769-6400 [email protected] St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400 [email protected] l FLOW: 1 - 1500 lpm, 0.25 - 400 US gpm l PRESSURE: Up to 480 bar, 7000 psi l OUTPUT OPTIONS: 4 - 20 mA or 0 - 5 V l BI-DIRECTIONAL operation l FLUIDS: Wide range of hydraulic oil, lubrication oils, and fuels l CALIBRATION: 21 cSt as standard. Special calibration possible l COMPREHENSIVE range of accessories available including pressure transducers, temperature sensors panel meters and cables. See MPT, TP125 and DP130 bulletin for details or consult sales office Hydraulic measurement and control

Outputs available Main ports Flow range Replace ** with mA or 5V to give complete model number. *CT 15 has one of the specified top ports. Functional specification Ambient temperature: 5 to 40 °C (41 - 104 °F) Fluid type: Oils, fuels, water glycol, water oil emulsions Fluid temperature: 5 to 90 °C (41 - 194 °F) continuous use. Accuracy: 15 to 100% of range - 1% of indicated reading Below 15% fixed accuracy of 1% of 15% of full scale (CT15 is 1% of full scale) Repeatability: Better than ± 0.2% Response Time: 50 m/s + 1 period Degree of protection*: CT-mA, CT-5V– IP66 (EN60529) *With cable connected...

Pressure Drop Chart Hydraulic Oil Viscosity 21 Centistokes 10.0 CT600, CT800 Connecting cable (5m) Extension cable (5m) Connector (M12x1 5 pin) Dimensions in mm (inches) Model No A Note: 1 UK gallon = 4.546 litres 1 US gallon = 3.785 litres Connection Details * CT1500 includes 4 feet on base, add 20 mm (3/4”) to D for full height. CT1500 is fitted with carry handles - not shown on diagram. D One M16 x 2 test point fitted as standard (Not shown) Pressure / Temp. connections * Note. CT 15 has also one Pressure / Temp connection

Turbine Flow Meters Accuracy All our flow meters are calibrated at 10 points over the flow range and its performance measured against a flow reference that is traceable to International standards. Accuracy is typically quoted in one of two ways: as a percentage of full scale (the maximum calibrated flow) or as a percentage of the indicated reading (the actual flow). Flow range (Turndown ratio) The accuracy is better described as the uncertainty of the flow reading compared to a known reference. Every flow measurement has an error associated with it, caused by the combination of a large number...