SAPHIR SYSTEM MANUAL WORKSTATION

1 / 1 PageView full catalog

SAPHIR SYSTEM MANUAL WORKSTATION

Product catalog summary

Power Connection:

Supply: Options include 230 V with loose wires or country-specific plug, Germany-specific safety contact plug (Schuko), and 400 V with IEC 60309 CeKon.
Device: Hard wired.

Saphir Manual Workstation WE:

System Type: Upright welding system.
Technologies and Functions: High power up to 5,000 W, SonoScan, digital frequency control with a 32-bit microcontroller, electronic amplitude control (50-100%), and control via Touch-PC with Windows OS.
Benefits: Programmable parameters for up to 99 welding processes, tool recognition with automatic program selection, parameter and process count monitoring, fan control, temperature management, and protection against short circuit, idle, and overload.
Interfaces: RS-232, RS-485, USB service interface, Ethernet through Touch-PC, and optional PROFINET interface.
Design: Space-saving Plug & Play system, preconfigured and ready to use, offering multiple uses and configuration possibilities.

Frequency, Power, and Supply Voltage:

20 kHz: Available at 400 V for 400 W, 800 W, 1,000 W, 2,000 W, 4,000 W, and 5,000 W.
35 kHz: Available at 230 V for 400 W, 800 W, and 1,000 W.

Specification:

Operable as an individual workstation or in semi-automatic mode, equipped with quality components from Weber Ultrasonics.

Catalog excerpts

TECHNOLOGIES, FUNCTIONS, BENEFITS It can be operated as an individual work station or in semi-automatic mode and is equipped with quality components of Weber Ultrasonics. POWER CONNECTION Supply - 230 V: Loose wires or country-specific plug - Germany: Safety contact plug (Schuko) - 400 V: IEC 60309 CeKon - High Power up to 5,000 W - SonoScan - Digital creation and control of frequency with 32-bit micro controller - Electronic amplitude control from 50 -100 % - Control and monitoring of all functions via Touch-PC with Windows OS - Programmable operating parameters for up to 99 individual welding processes - Tool recognition with automatic program selection - Monitoring of parameter and process count - Fan control - Temperature management - Short circuit, idle and overload protection - RS-232 and RS-485 interface - USB service interface - Ethernet interface through Touch-PC - Optional PROFINET interface Device - Hard wired FREQUENCY, POWER, AND SUPPLY VOLTAGE 400 W 800W 1,000 W 2,000W 4,000 W 5,000 W WEBER ULTRASONICS

Open the catalog to page 1

All Weber Ultrasonics catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list