Universal Digital display DA9602R
1Pages

{{requestButtons}}

Catalog excerpts

Universal Digital display DA9602R - 1

Technical Information This small universal display is a true all-rounder. It has a universal input for nearly all standard commercial temperature sensors and process signals. With its 24VDC sensors supply voltage up to 50 mA, an integrated totalising function and 2 relay outputs it is suitable for almost every application. Apart from the low installation depth, the ip65 front, the removable terminal blocks and the impressive clear display with 16 mm digit height, this product captivates by its excellent price/quality ratio. • Universal display in 96 x 48 mm format • Extremely low mounting depth 32 mm • Universal input for process signals, thermocouples, Pt100 • 16 mm high red LED display • 2 alarm outputs • High protection class IP65 (front) • Programming through buttons or software (USB-Port) Relay output: 2 closing contacts with separated grounds. 1,5 A at 240 VAC/30VDC Serial interface: Mini-USB (virtual COM-port) Operating power supply: 100 to 240 VAC +/-10 %, 50/60Hz, 6 VA Display: LED-Display, 5-digit, red with 16 mm high figures, Display area/measured value: -1.999 bis 30.000 Display area/Sum: 0 bis 9.999.999.999 (alternating display) Indication: 10 red indicators for alarm states, serial communication, totaliser function , min. and max. value. ON, depending on selection ON, communication via interface ON, when an alarm occurs ON, totaliser function ON, totaliser 6 up to 10 digits are displayed ON, when 1 up to 5 digits are displayed Buttons: 4 buttons are for programming and adjusting nominal values. Entry area: Adjustment of the input signal via buttons. Thermocouple: Type J, K, T, N, R, S, B, E; reference junction: Internal temp. sensor: Pt100 in 3-wire (alpha=0,00385) Linear inputs: 0V up to 5/10V, 0/4 mA up to 20 mA, 0 mV up to 50 mV Sensor type Thermocoup. Type J Thermocoup. Type K Thermocoup. Type T Thermocoup. Type N Thermocoup. Type R Thermocoup. Type S Thermocoup. Type B Thermocoup. Type E Pt100 Protection class: front: dust-tight and jet-proof (IP65) Housing: Front: plastic housing of polycarbonat (PC) L94-V2 Dimensions: W 96 mm x H 48 mm x D 35 mm. panel space measuring according to DIN: 93,0 x 45,5 mm. mounting by means of lockable clamping brackets (plastic) Connection: Via pluggable screw terminals. Accuracy: Thermocouples type J, K, T, E : 0,25 % of the range +/-1 °C Thermocouples type N, R, S, B: 0,25 % of the range +/-3 °C Pt100: 0,2 % of the range Linear analog input: 0,2 % of the range Resolution: internal resolution with 65.535 steps (16 Bit), resolution of display 32.000 steps. Environmental conditions: Operating temperature: 0° C to 50° C For temperatures above 30° C: 3% r.a.h. reductions per ° C Scope of delivery: Device, fixing material, seal, operating instructions. Measurement cycle: 55 Hz with programmable filter Input impedance: Thermocoup. Pt100, 0 to 50 mV: >10 moHM; 0 to 5/10 V: >500 KOhm; 0/4 to 20 mA: 100 Ohm Sensor power supply: 24 VDC +/-15 % @ 50 mA Alle Angaben ohne Gewahr, Irrtumer und An

Open the catalog to page 1

All Weber Sensors GmbH catalogs and technical brochures

  1. PAX DP

    1 Pages

  2. foto-captor

    2 Pages

  3. foto-captor

    2 Pages