Catalogs >
weber Sensors GmbH >
power supply unit 8010, 8011

power supply unit 8010, 8011
2Pages

Catalog excerpts

Power supply unit (PSU) Type 8010/8011 This PSU allows the operation of 24 VDC sensors, such as vent- and flow-captor units. It contains a 24 VDC power supply and a switching stage with optocoupler output with potential-free switching contact. An integrated LED indicates the switching status. Housing Makrolon housing with PG glands for sensor, mains and output connection for wall mounting. For applications where an AC power source is available on site. Device variants Type 8010 : For PNP-switching sensors or sensors with analog output signal. On connection of an analog signal to the input of the supply unit a switch signal is activated which controls an integrated relay when a fixed threshold of 50% of the max. input signal is reached. This provides the possibility, when connecting flow· and vent-captors with adjustable measuring range, to vary the switching point on a large scale; e.g. for the flow-captor 4114.30 related to water at flow velocity between 10 cm/s and 100 cm/s, resp. for the vent·captor 3202.30 related to air between 50 cm/s to 25 m/s. Type 8011 : For NPN-switching sensors. With these devices, the output relay is controlled directly by the switching output of the sensor. Technical data Type Sensor output Connecting data for captor supply Signal input 9 - 36 VDC, 18 - 75 VDC 24 VDC max. 125 mA, short circuit detected 85 - 264 VAC 24 VDC max. 230 mA, short circuit detected Ri approx. 500 Ω, Ie limited to 15 mA UE on ≤ 6 V UE off ≤ 18.5 V threshold switch 12 mA, hysteresis ± 0.8 mA Contact data of relay Switching voltage Switching current Mechanical data Protection class of PSU 30 VDC / 240 VAC 2.5 A AC/DC IP65 / DIN 40050 Air and creepage distances according to VDE 0110 Group C, 380 VE Electrical data Power consumption www.captor.de info@captor.de Tel.: +49 (0)4128 - 591· Fax: - 593 DE-25377 Kollmar Sensors GmbH Strohdeich 32 sales@captor.co.uk Tel.: +44 (1704) - 551684 · Fax: - 551297 Merseyside PR8 4DU, UK 66 Eastbourne Road, Southport Sensors Ltd. Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subject to alteration! Rev. AE

Open the catalog to page 1

Power supply unit (PSU) order description Basic circuit diagrams 85 - 264 VAC Basic output diagram 9 - 36 VDC, 18 - 75 VDC www.captor.de info@captor.de Tel.: +49 (0)4128 - 591· Fax: - 593 DE-25377 Kollmar Sensors GmbH Strohdeich 32 sales@captor.co.uk Tel.: +44 (1704) - 551684 · Fax: - 551297 Merseyside PR8 4DU, UK 66 Eastbourne Road, Southport Sensors Ltd. Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subject to alteration! Rev. AE 03.02.21

Open the catalog to page 2

power supply unit 8010, 8011 2Pages

Catalog excerpts

All Weber Sensors GmbH catalogs and technical brochures

power supply unit 8010, 8011
2Pages