Catalogs >
weber Sensors GmbH >
Data sheet proxi-captor 2610.3x

Data sheet proxi-captor 2610.3x
1 / 2Pages

Catalog excerpts

Inductive distance meter proxi-captor 2610.3x The proxi-captor 2610.3x is an inductive distance meter which can be applied to all automated metal control processes where an analog signal is required. The proxi-captor is either available with voltage output or with current output. For AC types the output is potential free. The high frequency oscillator is periodically triggered to produce damped oscillation pulses. Both the amplitude and duration of the pulses are directly proportional and, within a wide range, linear to the degree of damping aused by the presense of a conductor within the inductive field. This RF-signal is integrated and fed to the output amplifier. Both zero point and range (sensitivity) are adjustable. As a contactless transducer the proxi-captor type 2610.3x is ideally suited for distance measurement and tasks such as strip or edge detection in coiling or loop control systems, in the steel industry. • compact unit • simple to install • maintenance-free • shock and vibration proof • stainless steel housing Technical Data Type Construction Repeatability Temperature drift Ambient temp. range Vibration and shock Zero point adjustment Sensitivity adjustment Protection standard Housing Mounting plate Connection Measuring distance at full coverage Mass Linear range Power consumption Supply voltage * Type Output load Electrical output fully resin encapsulated no moving parts temperature compensated short circuit protected ISO 9001 : 2015 2610.3x stainless steel housing integrated mounting plate better than 1 mm within linear range ≤ 0,5 mm within linear range -20 °C to +70 °C ( -6 °F to 158 °F ) in accordance with DIN 57 4 11 potentiometer potentiometer IP 65 stainless steel housings, integrated mounting plate, encapsulated epoxy resin 220 x 220 mm (standard) 2 x 2 m silicone armoured cable each 3 x 0 .75 mm2 max. 140 mm, see graph * Supply voltage must be specified www.captor.de info@captor.de DE-25377 Kollmar, Germany Tel.: +49 (0)4128 - 591· Fax: - 593 Sensors GmbH Strohdeich 32 sales@captor.co.uk Tel.: +44 (1704) - 551684 · Fax: - 551297 Merseyside PR8 4DU, UK 66 Eastbourne Road, Southport Sensors Ltd. Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subje

Open the catalog to page 1

Inductive distance meter Mounting plate www.captor.de info@captor.de DE-25377 Kollmar, Germany Tel.: +49 (0)4128 - 591· Fax: - 593 Sensors GmbH Strohdeich 32 sales@captor.co.uk Tel.: +44 (1704) - 551684 · Fax: - 551297 Merseyside PR8 4DU, UK 66 Eastbourne Road, Southport Sensors Ltd. Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subject to alteration! Rev. AE 12.01.22

Open the catalog to page 2