1. Catalogs
  2. weber Sensors GmbH
  3. Data sheet foto-captor 1307.43

Data sheet foto-captor 1307.43

Data sheet foto-captor 1307.43

Data sheet foto-captor 1307.43

Product catalog summary
Technical Specifications
The document provides technical specifications for the foto-captor Type 1307.43. The ambient temperature range is -30 °C to +75 °C, with a minimum response temperature of 450 °C. The housing is made of anodized aluminium, and the unit is fully encapsulated. It has a protection standard of IP65 / DIN 40050 and weighs approximately 0.8 kg. The electrical connection is via a male socket and connector, with a supply voltage range of 24 VDC (20 - 27 VDC). The current consumption is 15mA, and the electrical output is an optocoupler output n.o. The maximum load current is 30 V / 50 mA / R=240 Ω, with a switching frequency of 1000 Hz and a switching delay of 0.2 ms for both activation and release.
Fibre Optic Cable (FOC)
The fibre optic cables are available in lengths of 2m, 3m, 4m, and 5m, with stainless steel end sleeves and metal flex hoses. The maximum ambient temperature for these cables is 400 °C, and their mass ranges from 120g to 270g depending on the length.
Mounting and Alignment Instructions
The electronic unit should be mounted considering the length of the fibre optic cable and ambient temperature conditions. The base plate has 3 mounting holes of 6.5 mm diameter. Electrical connections should be made using a 6-pin cable, following the connection diagram. The fibre optic cable should be installed to avoid mechanical damage, kinks, and vibrations, using protective hoses or pipes if necessary.
Connection Diagram
The document includes a connection diagram for the Harting-Connector, detailing the view from the contact side and the cable connecting clamp. It specifies the use of yellow/green for earth connections.
See more

Catalog excerpts

Data sheet foto-captor 1307.43-1

foto-captor Technical Documentation Type 1307.43 www.captor.de [email protected] Tel.: +49 (0)4128 - 591· Fax: - 593 DE-25377 Kollmar Sensors GmbH Strohdeich 32 [email protected] Tel.: +44 (1704) - 551684 · Fax: - 551297 Merseyside PR8 4DU, UK 66 Eastbourne Road, Southport Sensors Ltd. Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 [email protected] Technical data subject to alteration! Rev. AC 10.12.18

 Open the catalog to page 1
Data sheet foto-captor 1307.43-2

Remote System Operating Instructions Please read carefully: No liability can be accepted for damage caused by improper use of the captor. 1. Technical data Ambient temperature Minimum response temperature Viewing angle Scanned area at 2 m distance Direction of scanned area anodized aluminium all parts and components are fully encapsulated Protection standard Function indicator LED, green (ON with receipt of IR-radiation) Electrical connection male socket and connector, Staf® 6 Supply voltage (range) Test function Current consumption Electrical output Switching frequency Switching delay activation...

 Open the catalog to page 2
Data sheet foto-captor 1307.43-3

foto-captor Type 1307.43 Operating Instructions 3. Connection Diagram Harting-Connector View from Contact Side View from cable connecting clamp 4. Mounting and Alignment Instructions 1. foto-captor Type 1307.43 Mount the electronic unit at a site that corresponds with the actual length of the fibre optic cable, and which meets the tolerable ambient temperature conditions! For mounting, the base plate is prepared with 3 mounting holes of 6.5 mm diameter. Note: In case of increased ambient temperature caused by the IR-radiation of the hot product, the tolerable temperature limit can be maintained...

 Open the catalog to page 3
Data sheet foto-captor 1307.43-4

Lichtleitkabel (LLK) Fibre optic cable (FOC) Kabel-Kupplung Cable female plug Staf oder Han Staf or Han foto - captor Elektronik - Einheit / Electronics unit siehe Tabelle see table File - Nr.: Einbaubuchse male socket weber Sensors GmbH 25377 Kollmar, Strohdeich 32 Tel.: +49 4128 591 - Fax: - 593 www.captor.de [email protected]

 Open the catalog to page 4

All Weber Sensors GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.