Catalogs >
weber Sensors GmbH >
Data sheet flow-captor 4220.1xF/.1xTM xx °C

Data sheet flow-captor 4220.1xF/.1xTM xx °C
1 / 4Pages

Catalog excerpts

Data sheet flow-captor 4220.1xF/.1xTM xx °C - 1

flow switch for water-based fluids with simultaneous temperature monitoring flow-captor 4220.1xF/.1xTM xx °C The flow-captor type 4220.1xF/.1xT M xx °C is ideally suited for use in automation processes and other industrial applications where both the flow and the temperature of the medium need to be monitored. The sensor operates according to the calorimetric measuring principle and without mechanically moved parts. The sensor detects the flow velocity and the medium temperature and converts both into electrical signals.        robust stainless steel construction (M) precise switching sensor separate adjustment of flow range and flow switching point factory setting of the temperature switch-point according to customer’s specification analog display of present flow speed and display of adjusted flow set-point via LED chain LED display of operating status ISO 9001:2015 Control and Display Panel LED-string for display of flow range Measuring range adjusted to 3 m/s = 100 % (9. LED) Flashing LED for display of adjusted set-point Set-point adjusted to 50 % of end value (5. LED) Potentiometer for flow set-point Flow speed equates 75 % (7. LED) Potentiometer for adjustment of measuring range from .2 to 3 m/s Temp LED is red: Flow rate is above the adjusted set-point. LED (green/red) for display of output status “temp” Flow LED is ON: Flow rate is above the adjusted set-point. LED (green/red) for display of output status “flow” Sensor heads The sensor head is constructed of only one piece of electro-polished stainless steel and without any sensor element intruding into the medium. Easy installation by means of T-piece or welded fitting. For aggressive media special sensor head materials as Titanium or Hastelloy can be offered. The housing is made of stainless steel 303. The electronics inside is completely epoxy resin encapsulated G 1/2" BSP thread in various sensor head lengths 1/2" -14 NPT thread alternatively www.captor.de Sensors GmbH Strohdeich 32 DE-25377 Kollmar Tel.: +49 (0)4128 - 591· Fax: - 593 info@captor.de Sensors Ltd. 66 Eastbourne Road, Southport Merseyside PR8 4DU, UK Tel.: +44 (1704) - 551684 · Fax: - 551297 sales@captor.co.uk Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data

Open the catalog to page 1

Data sheet flow-captor 4220.1xF/.1xTM xx °C - 2

flow switch for water-based fluids with simultaneous temperature monitoring flow-captor 4220.1xF/.1xTM xx °C Technical data Type Medium General sensor data Medium temperature Ambient temperature Pressure Sensor data flow Measuring range Set-point range Response time Linearity deviation Repeatability tolerance Hysteresis Temperature drift Sensor data temperature 4220.1xF/.1xTM xx °C water-based -20 °C to +80 °C / -4 °F to +176 °F -20 °C to +70 °C / -4 °F to +158 °F max. 100 bar (1450 PSI) 0 - 20 cm/s to 0 - 300 cm/s, continuously adjustable approx. 15 % - 90 % of range setting 2 sec. - 10...

Open the catalog to page 2

Data sheet flow-captor 4220.1xF/.1xTM xx °C - 3

flow switch for water-based fluids with simultaneous temperature monitoring Connection diagram: Transistorausgang transistor output www.captor.de Sensors GmbH Strohdeich 32 DE-25377 Kollmar Tel.: +49 (0)4128 - 591· Fax: - 593 info@captor.de Sensors Ltd. 66 Eastbourne Road, Southport Merseyside PR8 4DU, UK Tel.: +44 (1704) - 551684 · Fax: - 551297 sales@captor.co.uk Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subject to alteration! Rev. AF 28.02.1

Open the catalog to page 3