Catalogs >
weber Sensors GmbH >
Data sheet flow-captor 4220.1xF/.1xT xx °C

Data sheet flow-captor 4220.1xF/.1xT xx °C
1 / 3Pages

Catalog excerpts

Data sheet flow-captor 4220.1xF/.1xT xx °C - 1

Flow switch for water-based media flow-captor 4320.1x/xx The flow-captor type 4320.1x/xx is a flow monitor which is used in automation processes and other industrial applications where liquid media need to be monitored. The 432x-series offers “inline-models” that have been specially designed for installation in smaller pipe diameters. The sensor works according to the calorimetric measuring principle. The detection takes place inside the inline tube, whereby the sensor measures the flow velocity of the medium and converts it into an electrical signal. • • • • • • • for small pipe sizes from OD6 up to OD28 precise switching flow sensor with high accuracy even with slower flows separate adjustment of flow range and switching point analogue display of flow condition and adjusted switch-point via LED chain electronic function without any mechanically moved parts robust industrial design (special potting) ISO 9001:2015 Control and display panel LED chain for display of flow speed Flashing LED for display of adjusted set-point Potentiometer for set-point adjustment Potentiometer for range adjustment from .2 to 3 m/s. LED for display of output status Flow speed equates 75 % (7. LED) Green LED is ON: Flow rate is above the adjusted set-point The sensor element of the inline flow-captor is fitted to the out-side of the sensor tube. Since there is no element inside the tube, the sensor is non-intrusive to the flow. The robust housing is constructed of glass fibre reinforced PBTP (Ultradur ®). The electronics housing includes a full resin encapsulation. The sensor tube (length 200 mm) is made of stainless steel 316 and is an integral part of the inline flow-captor. For aggressive media other materials can be offered on request. Set-point adjusted to 50 % of end value (5. LED) Free flow This series is available with sensor tubes in different sizes as 6 x 1, 8 x 1, 12 x 1, 18 x 1,5, 22 x 1,5 as well as 28 x 1,5 mm. Measuring range adjusted to 3 m/s = 100 % (9. LED) Mechanical connection Cutting ring couplings, to be ordered separately, have proven their value when mounting the sensor into pipe systems. By slightly tightening the swivel nut the v-shaped ring inside of the coupling cuts into the sensor tube wall and thus ensures a dense and reliable form closure. www.captor.de Sensors GmbH Strohdeich 32 DE-25377 Kollmar, Germany Tel.: +49 (0)4128 - 591· Fax: - 593 info@captor.de Sensors Ltd. 66 Eastbourne Road, Southport Merseyside PR8 4DU, UK Tel.: +44 (1704) - 551684 · Fax: - 551297 sales@captor.co.uk Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subject to alteratio

Open the catalog to page 1

Data sheet flow-captor 4220.1xF/.1xT xx °C - 2

Flow switch for water-based media flow-captor 4320.1x/xx Technical data Type Medium Sensor data Measuring range Flow volume* at 300 cm/s related to tube inner diameter Set-point range Medium temperature Ambient temperature Pressure Response time Linearity deviation Repeatability Hysteresis Temperature drift Mechanical data Protection rate Material housing Material inline tube Torsion between pipe and housing Pipe sizes OD x wall thickness Electrical connection Sensor dimensions Electrical data Operating voltage Current consumption Power consumption Switching current Circuit protection...

Open the catalog to page 2

Data sheet flow-captor 4220.1xF/.1xT xx °C - 3

Flow switch for water-based media flow-captor 4320.1x/xx Connection diagram brown Transistor output black blue cable www.captor.de Sensors GmbH Strohdeich 32 DE-25377 Kollmar, Germany Tel.: +49 (0)4128 - 591· Fax: - 593 info@captor.de Sensors Ltd. 66 Eastbourne Road, Southport Merseyside PR8 4DU, UK Tel.: +44 (1704) - 551684 · Fax: - 551297 sales@captor.co.uk Sensors LLC. 4462 Bretton Court, Building 1, Suite 7 Acworth, Georgia 30101, USA Tel.: +1 (770) 592 - 6630 · Fax: - 592 6640 sales@captor.com Technical data subject to alteration! Rev. AN 15.10.19

Open the catalog to page 3