TECHNICAL INFORMATION Digital Display PAX P Process Input Meter The digital display unit PAX P converts the analog output signal of flow- and vent-captor units into a digital value. The 5 digit display can be set for „actual value“ (IST) or „totalized value“ (TOT). 5 digit display, 14 mm high, red LED Display setting: MIN/MAX/TOT/IST 20 measurements per second, 16 Bit 16 step linearisation Programmable by push buttons at the unit itself or by PC Handling:The unit will be operated by 5 push buttons on the front panel. During the programming action it will be specified which displayed values and programmed data will be changeable or protected after activating the programming stop. Totalizer: The signal totalizer can be used to compute a time - input product. This can be used to provide a readout of totalized flow. A time base and a factor provide a flexible unit. Unit: An individual physical unit (for example: m³/h) can be positioned behind the front panal. If the unit sheet is transparent it will be illuminated by a background light. Mechanical Data Housing robust plastic housing, dark red Relative air humidity max. 85 %, no condensation Ambient temperature 0 to 40 °C under function conditions Protection standard IP 65 onto front panel Electrical Data Supply voltage 85-250 VAC Power consumption 15 VA Input signal 0 to 20 mA, 4 to 20 mA, 0 to 10 V Connection backside terminal row Additional Output Function Cards output signal can be selected, 0 to 20 mA, 4 to 20 mA or 0 to 10 VDC PAXCDL10 / Analog output output is galvanic isolated PAXCDS40 / Transistor outout 4x PNP-OC transistors: max. 100 mA/30 V galvanic isolated PAXCDS10 / Relay output 2 x relay, single pole double throw contact 5 A at 120/230 VAC Abmessungen (in mm) S e n s o r s L t d . · Strohdeich 32 · D-25377 Kollmar · Tel.: +49 4128-591 · Fax: -593 eMail: [email protected] Technical data subject to chang