Product list with description EN
3Pages

WE KEM snc di Michieli M. e Valentino R. Via G. Lazzari, 3 40057 - Granarolo Dell’Emilia - BO VAT n.: 03440361206 +393298530488 - +393383149418 info@we-kem.it - www.we-kem.it Product name Sales formats Pickling gel for AISI 300 series stainless steel. MADE IN ITALY Pickling is the basic treatment to eliminate traces of oxide due to thermal changes. Pickling is not a simple aesthetic action that serves to remove the 'black of the weld'. In fact, good pickling has the task of removing the depleted chromium layer due to thermal alteration, a critical area for corrosive attack as it is unprotected. Only as a side effect bleach the weld. WE DEK 100 GEL is a pickling gel for stainless steel 300 series excluding AISI 303. It allows the pickling of both weld-only strokes and the entire surface. It can be used by spreading it with anti-acid brushes or dispensing it with a polypropylene diaphragm pump (using the WE DEK 100 GEL SPRAY spray version). It is recommended not to use the product in direct sunlight and not to work on surfaces that are too hot, in which case it is advisable to cool them with waste water. Note: Before pickling: degreasing and decontaminating the surface in order to achieve uniformity in pickling After pickling: passivate the surface in order to increase the corrosion resistance. WE DEK 125 GEL Pickling gel for AISI 300 series stainless steel. - strong MADE IN ITALY Pickling is the basic treatment to eliminate traces of oxide due to thermal changes. Pickling is not a simple aesthetic action that serves to remove the 'black of the weld'. In fact, good pickling has the task of removing the depleted chromium layer due to thermal alteration, a critical area for corrosive attack as it is unprotected. Only as a side effect bleach the weld. WE DEK 125 GEL is a pickling gel for stainless steel 300 series excluding AISI 303. It allows the pickling of both weld-only strokes and the entire surface. It can be used by spreading it with anti-acid brushes or dispensing it with a polypropylene diaphragm pump (using the WE DEK 125 GEL SPRAY spray version). It is recommended not to use the product in direct sunlight and not to work on surfaces that are too hot, in which case it is advisable to cool them with waste water. Note: Before pickling: degreasing and decontaminating the surface in order to achieve uniformity in pickling After pickling: passivate the surface in order to increase the corrosion resistance. WE DEK 150 GEL Pickling gel for AISI 300 series stainless steel. - strong - for winter uses with colder outdoor 1KG, 3KG, 5KG, temperatures. 10KG, 30KG MADE IN ITALY Pickling is the basic treatment to eliminate traces of oxide due to thermal changes. Pickling is not a simple aesthetic action that serves to remove the 'black of the weld'. In fact, good pickling has the task of removing the depleted chromium layer due to thermal alteration, a critical area for corrosive attack as it is unprotected. Only as a side effect bleach the weld. WE DEK 150 GEL is a pickling gel for stainless steel 300 series excluding AISI 303. It allows the pickling of both weld-only strokes and the entire surface. It can be used by spreading it with anti-acid brushes or dispensing it with a polypropylene diaphragm pump (using the WE DEK 150 GEL SPRAY spray version). It is recommended not to use the product in direct sunlight and not to work on surfaces that are too hot, in which case it is advisable to cool them with waste water. Note: Before pickling: degreasing and decontaminating the surface in order to achieve uniformity in pickling After pickling: passivate the surface in order to increase the corrosion resistance. AISI 300 and 400 Series Stainless Steel Passivating Gel - Nitrate Free After decontaminating the artefact from possible pollutants, the stainless steel remains without any protection and therefore exposed to aggressive external attacks. Passivation makes it possible to restore the surface chromium oxide layer that had been impoverished or polluted by processing. Passivation is essential in order to guarantee the stainless steel. WE PASS 400 GEL is a passivating gel for stainless steel 300 and 400 series for specific brush use - The product is free of Nitrates It allows the passivation of both only sections with welding, and of the entire surface. It can be used by spreading it with anti-acid brushes or dispensing it with a polypropylene diaphragm pump when using the spray version (WE PASS 400 GEL SPRAY). It is recommended not to use the product in direct sunlight and not to work on surfaces that are too hot, in which case it is advisable to cool them with waste water.

Product name Degreasing Liquid for Stainless Steel 300 Series and Duplex. 5KG, 10KG, 30KG, It consists of the removal of traces of oil, fats and other contaminants due to processing. 1000KG Degreasing of the artefact must be done before any other chemical intervention, as the presence of these contaminants can inhibit the effect of the pickling agent and produce stains on the treated surface. Sales formats WE VMDA 08 is a liquid degreaser for 300 series and Duplex stainless steel. The treatment conferred by WE VMDA 08 is particularly appreciated because in addition to removing the...

Product name Sales formats Passivating liquid for AISI 300 and 400 series stainless steel. Nitrate free After decontaminating the artefact from possible pollutants, the stainless steel remains without any protection and therefore exposed to aggressive external attacks. Passivation makes it possible to restore the surface chromium oxide layer that had been impoverished or polluted by processing. Passivation is essential in order to guarantee the stainless steel. WE PASS 40 L PU is a passivating liquid for stainless steel 300 and 400 series for specific immersion use. Through its action, the...