TECHNICAL DATA SHEET 50-STATE VOC COMPLIANT PHYSICAL CHARACTERISTICS • Appearance: Aerosol – Aerosolized Liquid Bulk – Liquid • Color: Light amber cloudy liquid • Odor: Characteristic • Freeze Point/Pour Point: <-81° F (-63° C)(ASTM D-97) • Kinematic Viscosity @ 100° F (38° C): 2.8 cSt • Specific Gravity @ 77° F (25° C): 0.81 • Boiling Point (initial): 360° F (183° C) Vapor Density: >1 Flash Point: 138° F (59° C)(TCC) Percent Volatile: 70 -75% by weight VOCs: 24.5% by weight Lower Flammability Limit: 0.6% Upper Flammability Limit: 8.0% Vapor Pressure: Aerosol: 95-115 psi @ 70° F (21° C) Bulk: 1 psi @ 100° F (38° C)(ASTM D323) Trigger Pro® Non-Aerosol 20oz Spray Applicator Bottle 16oz (Empty) Bulk Liquid 1, 5 & 55 Gallon PRODUCT FEATURES: WD-40 Multi-Use Product lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools. FLUID PROPERTIES • Operating Temperature: -60° F to 300° F (-50° C to 150° C) • Dielectric Strength: 38,000 volts per 0.10 inch • Solubility in Water: Insoluble • Kb Value: 25 • Wet Film Thickness: 50 um (0.002 inch) • Coverage: 600-1000 ft2 per gal • Surface Compatibility: For all variations : WD-40 Multi-Use Product demonstrates none to negligible deleterious effect to plastic, rubber and metal hard surfaces. This includes Acetal, neoprene/hard rubber, HDPE, PPS Copolymer Polysulfone, Teflon, Viton, steel, galvanized steel hot dip, electroplated, copper, brass, magnesium, nickel, tin plate, titanium and zinc. • Surface Cautions: Nearly all surfaces interact with WD-40 Multi-Use Product as they would any high grade aliphatic petroleum spirit. Certain types of rubber will swell upon prolonged immersion. Wax polishes and certain wax coatings may be softened by WD-40 Multi-Use Product. Clear polycarbonate and polystyrene may stress craze or crack. Always test surfaces first. TYPICAL PERFORMANCE: WD-40 ® MULTI-USE PRODUCT TEST METHOD ASTM D4172 ASTM D3233 ASTM B-117 Lubricates and Protects Extreme Pressure Lubrication Corrosion

WD-40 MULTI-USE PRODUCT AND THE ENVIRONMENT • WD-40 Multi-Use Product does not contain chloroflurocarbons (CFCs), (HCFCs) • WD-40 Multi-Use Product does not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated diphenylether complying with the restricted substances listed in Article 4(1) of the RoHS Directive. • WD-40 Multi-Use Product contains no ingredients requiring California Prop 65 listing or labeling such as benzene or toluene. • WD-40 Multi-Use Product complies with VOC regulations in all 50 states. • WD-40 Multi-Use...