Series 8.5863, 8.5883 Key-Features: - Solid shaft: maximum diameter 10 mm - Hollow shaft: maximum diameter 14 mm - Blind hollow shaft: maximum diameter 15 mm - Interfaces: SSI, BiSS-C, SSI/BiSS-C +, SinCos, SSI/BiSS-C + RS422 - Housing diameter 58 mm - Protection class up to IP67 - Resolution up to 12 Bit in Multiturn Mode - Maximum revolution speed 12000 turns/min - Temperature range -40...+90°C

Absolute encoders – multiturn Standard mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 14 mm and a blind hollow shaft up to 15 mm are available, as well as versions with additional SinCos or RS422 incremental track. High rotational speed Temperature range High protection level High shaft load capacity Shock / vibration resistant Magnetic field proof Reverse polarity protection • Tried-and-tested in applications...

Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental al Flange 1 = with spring element, long, IP65 2 = with spring element, long, IP67 3 = with stator coupling, IP65 0 65 mm [2.56”] 4 = with stator coupling, IP67 0 65 mm [2.56”] _5 = withstator coupling,JP65 0 63 mm [2.48"1 6 = with stator coupling, IP67 0 63 mm [2.48”] bl Through hollow shaft 3 = 0 10 mm [0.39”] _4 = 0 12 mm_[0.47"1 5 = 0 14 mm [0.55”] 8 = 0 3/8” 9 = 0 1/2” Blind hollow shaft (insertion depth max. 30 mm [1.18“]) 6 = 0 15 mm [0.59”] dl Type of connection 2 = radial cable, 1 m [3.28'] PVC B = radial cable, special...

mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) Technical data BiSS interface Mechanical characteristics Maximum speed shaft version IP65 up to 70°C [158°F] 12000 min-1, 10000 min-1 (continuous) Maximum speed hollow shaft version IP65 up to 70°C [158°F] 9000 min-1, 6000 min-1 (continuous) at 20°C [68°F]IP67 < 0.05 Nm Mass moment of inertia shaft version 4.0 x 10-6 kgm2 hollow shaft version 7.0 x 10-6 kgm2 Load capacity of shaft radial 80 N axial 40 N Weight approx. 0.45 kg [15.87 oz] Protection acc. to EN 60529 housing side IP67 shaft side IP65, opt. IP67 Working temperature...

mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SET input or SET button Input active HIGH Input type comparator Signal level HIGH min: 60 % of +V (power supply) max: +V LOW max: 25 % of +V (power supply) Input current < 0.5 mA Timeout after SET signal 14 ms The encoder can be set to zero at any position by means of a HIGH signal on the SET input or by pressing the optional SET button (with a pencil, ball-point pen or similar). Other preset values can be factory-programmed. The SET input has a signal processing time of approx. 1 ms. Once the SET function has been triggered,...

mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) Terminal assignment C+, C-: D+, D-: A, ' : B, B: SET: DIR: Stat: PH H: Encoder power supply +V DC Encoder power supply ground GND (0 V) Using the sensor outputs of the encoder, the voltage present can be measured and if necessary increased accordingly. Clock signal Data signal Incremental output channel A (cosine) Incremental output channel B (sine) SET input Direction input Status output Plug connector housing (shield) Top view of mating side, male contact base

mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) Dimensions shaft version Dimensions in mm [inch] Clamping flange, 0 58 [2.28] Flange type 1 and 3 (drawing with M23 connector) m 3 x M3, 6 [0.24] deep \2\ 3 x M4, 8 [0.32] deep Synchro flange, 0 58 [2.28] Flange type 2 and 4 (drawing with M12 connector) m 3 x M4, 6 [0.24] deep Square flange, EH 63.5 [2.5] Flange type 5 and 7 (drawing with cable)

mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) Dimensions hollow shaft version Dimensions in mm [inch] Flange with spring element, long Flange type 1 and 2 (drawing with M12 connector) HI Slot spring element, recommendation: cylindrical pin DIN 7, 0 4 [0.16] [2] 3 x M3, 6 [0.24] deep [3 Recommended torque for the clamping ring 0.6 Nm (drawing with tangential cable) □ Slot spring element, recommendation: cylindrical pin DIN 7, 0 4 [0.16] [2] 3 x M3, 5.5 [0.22] deep [3 Status-LED E SET button [5] Recommended torque for the clamping ring 0.6 Nm

mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) Dimensions hollow shaft version Dimensions in mm [inch] Flange with stator coupling, 0 63 [2.48] Flange type 5 and 6 Pitch circle diameter for fixing screws 63 [2.48] (drawing with M23 connector) HI Fixing screws DIN 912 M2,5 x 6 (washer included in delivery) [2] Recommended torque for the clamping ring 0.6 Nm Flange with stator coupling, 0 65 [2.56] Flange type 3 and 4 Pitch circle diameter for fixing screws 65 [2.56] (drawing with cable) HI Recommended torque for the clamping ring 0.6 Nm Subject to change without prior...