1. Catalogs
  2. WayCon Positionsmesstechnik GmbH
  3. Magnetostrictive Transducer MSB

Magnetostrictive Transducer MSB
1 /7Pages

Magnetostrictive Transducer MSB

Magnetostrictive Transducer MSB
1 /7Pages

Catalog excerpts

Magnetostrictive Transducer MSB-1

Key-Features: - Available measurement ranges from 50 - 4000 mm - Very small overall dimensions - Standard flange or threaded flange - Excellent resistance to shock and vibration - Displacement speed up to 10 m/s - Linearity up to ±0.02 % - Working temperature -30...+75 °C - Working pressure up to 350 bar - Protection class IP67 - Output signals: Analog, Digital Start/Stop

 Open the catalog to page 1
Magnetostrictive Transducer MSB-2

* output signal 0.1...5.1 V: the maximum measurement range is 1250 mm

 Open the catalog to page 2
Magnetostrictive Transducer MSB-4

TECHNICAL DRAWING MSB...F2 Dimensions MSB...F2 Thread M18x1,5 The seal surface must be free from winding or longitudinal scratches.

 Open the catalog to page 4
Magnetostrictive Transducer MSB-5

Note: in case of cable length shortening, after cutting the cable take care of soldering and insulating to green and grey wires together. cable output MSB...F1, length 1 m CONNECTION DIGITAL OUTPUT START/STOP MSB...S-F1 cable output MSB...F1, length 1 m Series MSB...S magnetostrictive transducers supply digital outputs in START/STOP format with RS422 differential serial transmission. The transducer requests an Initialisation pulse that launches sampling. The following pulses are transmitted on the outputs: Start: the Initialisation pulse retransmitted Stop: the pulse corresponding to the position...

 Open the catalog to page 5
Magnetostrictive Transducer MSB-6

Cable for analog output, connector M12, 5 pole K5P2M-S-M12 2 m, connector, straight, IP67, shielded K5P5M-S-M12 5 m, connector, straight, IP67, shielded K5P10M-S-M12 10 m, connector, straight, IP67, shielded K5P2M-SW-M12 2 m, connector, angular, IP67, shielded K5P5M-SW-M12 5 m, connector, angular, IP67, shielded K5P10M-SW-M12 10 m, connector, angular, IP67, shielded Note: PCUR026 and PCUR027 is supplied with kit PKIT036 for floating cursor for liquids. Material PCUR026, PCUR027: high grade steel AISI 316 Magnetic cursors for liquids need a higher measurement range.

 Open the catalog to page 6
Magnetostrictive Transducer MSB-7

Note: p|ease order magnetic cursor separate|y (see page 6). * Magnetic cursors for liquids need a higher measurement range. ** Output signal 0.1...5.1 V: maximum measurement range is 1250 mm Base model: 0.1...10.1 V analog output, standard flange F1, cable output with 1 m cable Options with additional charge on base model MSB...N/K/E-F2: Mating Connector E Analog output 4...20 mA D5-W-M12-S Connector M12, 5-pole, angular, IP67 Magnetic cursor (please order in addition to the sensor) MSB...N/K/E-F2: Connection cable PCUR023 Magnetic cursor, 0 32.8 with 90 degree slit K5P5M-S-M12 5 m, M12 connector...

 Open the catalog to page 7

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures

  1. LVIG SERIES

    5  Pages

  2. LASER SENSORS

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.