1. Catalogs
  2. WayCon Positionsmesstechnik GmbH
  3. Magnetostrictive Transducer MAZ

Magnetostrictive Transducer MAZ

Magnetostrictive Transducer MAZ

Magnetostrictive Transducer MAZ

Product catalog summary
Key Features:
  • Measurement ranges from 50 to 2500 mm.
  • Distance and speed measurement with CANopen.
  • Magnetic or floating cursor for liquids.
  • Displacement speed up to 10 m/s.
  • Linearity up to ±0.02%.
  • Operating pressure up to 350 bar.
  • Operating temperature range: -30 to +75 °C.
  • Protection class IP67.
  • Output signals: Analog, SSI, CANopen.
Technical Data:
  • Measurement range options: 50 to 2500 mm.
  • Accuracy of speed output: <2%.
  • Displacement speed: ≤10 m/s.
  • Linearity: ±0.02%.
  • Resolution: 16 bit, 5 μm (2 μm on request).
  • Repeatability: <0.01 mm.
  • Hysteresis: <0.01 mm.
  • Sampling time varies by model and range.
  • Output signals include 0...10 V, 4...20 mA, CANopen, SSI.
  • Power supply: 24 VDC ±20%.
  • Protection against polarity inversion and overvoltage.
  • Shock and vibration resistance as per DIN standards.
  • Housing material: Stainless steel AISI 316.
Sampling Time and Dimensions:
  • MAZ-A: Sampling time ranges from 0.5 to 2 ms depending on measurement range.
  • MAZ-C and MAZ-S: Sampling time ranges from 1 to 4 ms.
  • Overall housing length varies with measurement range.
Technical Drawing:
  • Details for MAZ-A, MAZ-S, and MAZ-C models with specific dimensions for mounting inside a cylinder.
Magnetic Cursors:
  • Various models with specific dimensions and scope of delivery including nuts, washers, and screws.
Electrical Connection:
  • Different connectors and cable outputs for MAZ-A, MAZ-C, and MAZ-S models.
  • Specific pin configurations for output signals and power supply.
Order Code:
  • Analog output options with different connectors and cable lengths.
  • Digital absolute CANopen and SSI options with specific configurations.
  • Magnetic cursors must be ordered separately.
Accessories:
  • Magnetic cursors for analog output, SSI, and CANopen.
  • Cables with mating connectors for different outputs.
  • Digital displays for sensors with analog and SSI outputs.
See more

Catalog excerpts

Magnetostrictive Transducer MAZ-1

Series MAZ Key-Features: - Measurement ranges from 50 to 2500 mm - Distance and speed (with CANopen) measurement - Magnetic cursor, or floating cursor for liquids - Displacement speed up to 10 m/s - Linearity up to ±0.02 % - Operating pressure up to 350 bar - Operating temperature -30...+75 °C - Protection class IP67 - Output signals: Analog, SSI, CANopen

 Open the catalog to page 1
Magnetostrictive Transducer MAZ-2

TECHNICAL DATA MAZ-A Measurement range Measured dimension position / speed Measurement range speed Accuracy of speed output Displacement speed Sampling time position (table below) Output signal Output load max. Power supply Protection against polarity inversion Protection against overvoltage Operating temperature Storage temperature Temperature coefficient Operating pressure Protection class Electrical connection Housing material stainless steel AISI 316 SAMPLING TIME AND DIMENSIONS MAZ-A Measurement range Sampling time Overall housing length MAZ-C Measurement range Sampling time Overall housing...

 Open the catalog to page 2
Magnetostrictive Transducer MAZ-3

*for strokes over 1000 mm, the non-active zone (55 mm) increases to 60 mm because the tip includes a M4 threaded hole.

 Open the catalog to page 3
Magnetostrictive Transducer MAZ-4

GROUNDING — transducer element cable shield — (machine ground) (machine ground) cable holder — (isolated)

 Open the catalog to page 4
Magnetostrictive Transducer MAZ-5

Magnetic cursor ELECTRICAL CONNECTION MAZ-A

 Open the catalog to page 5
Magnetostrictive Transducer MAZ-7

ORDER CODE ANALOG OUTPUT MAZ Connection Connector M12, 5 pins Connector M16, 6 pins Cable output, 7 wires, PVC Measurement range [mm] see „Technical Data“ Cable length for connection F 1m 2m 5m 10 m Cable length for connection F 1m 2m 5m 10 m Output type Analog output Data transmission rate 500 kBaud Cable length for connection F 1m 2m 5m 10 m Output code Binary Gray Note: Magnetic cursors must be ordered separately! ORDER CODE DIGITAL ABSOLUTE CANopen MAZ Output type Digital absolute CANopen Connection Connector M12, 5 pins Connector M16, 6 pins Connector 2 x M12, 5 pins Cable output, 4 wires,...

 Open the catalog to page 7
Magnetostrictive Transducer MAZ-8

Magnetic cursors for analog output and SSI PCUR095 magnetic cursor 032.8 mm PCUR096 magnetic cursor 032.8 mm, slit 90° PCUR098 floating cursor, hole 012 mm Magnetic cursors for CANopen PCUR022 magnetic cursor 032.8 mm PCUR023 magnetic cursor 032.8 mm, slit 90° PCUR026 floating cursor, hole 012 mm PCUR027 floating cursor, hole 015 mm Cable with mating connector M12 (female) for analog output K5P2M-S-M12 2 m, straight connector, 5 pins, shielded K5P5M-S-M12 5 m, straight connector, 5 pins, shielded K5P10M-S-M12 10 m, straight connector, 5 pins, shielded K5P2M-SW-M12 2 m, angular connector, 5 pins,...

 Open the catalog to page 8

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures

  1. LVIG SERIES

    5  Pages

  2. LASER SENSORS

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.