- Low cost series for use in dry environments - Measurement ranges: 50 to 1250 mm - Linearity up to ±0.1 % of full scale - Output signal: Potentiometer or optical Incremental-Encoder (TTL) - Low weight: 85 g - Thermoplastic body - Compact size - Wire rope: nylon jacketed stainless steel - Easy installation

11 Resolution may be increased by a factor of four with interface electronics capable of quadrature times 4 counting mode. 2) At 1 VDC excitation voltage. To calculate nominal output voltage in application, multiply nominal output shown by excitation voltage of application.

LX-PA Measurement range [mm] LX-EP Measurement range [mm]

ELECTRICAL CONNECTION LX-PA Measurement range from 250 mm 3 ACCESSORY MOUNTING KIT LX-Mount WARNING NOTICES • Don’t let the rope snap back. If the rope is retracted freely, this may lead to injuries (whiplash effect) and the device may be damaged. Caution when unhooking and retracting the rope into the sensor. • Never exceed the specified measurement range when extracting the rope! • Do not try to open the device. The stored energy of the spring drive may lead to injuries when being mishandled. • Do not touch the rope when operating the sensor. • Avoid guiding the rope over edges or corners....

ORDER CODE LX-PA LX-PA Draw wire material nylon jacketed stainless steel Ø 0.46 mm stainless steel, Ø 0.41 mm Potentiometer resistance 1 kΩ 5 kΩ 10 kΩ Connector type (see below) no connector connector at cable with mating connector con. at cable without mating connector Measurement range see „Technical Data“ Connection type solder terminals Cable output (0.15 m) Cable output (1 m) Cable output (2 m) Cable output (3 m) Cable output (4 m) Cable output (5 m) The Standard versions LX-PA-...-N1N-NNN are usually in stock. Different versions have a typical delivery time of 3 weeks. Connector type LX-PA...

Mounting kit LX-Mount Sensor mounting, adjustable in 2 dimensions Connection cable for LX-EP 10172-1M 1 m, with mating connector 10172-2M 2 m, with mating connector 10172-3M 3 m, with mating connector 10172-4M 4 m, with mating connector 10172-5M 5 m, with mating connector Digital displays for sensors with analog output LX-PA, 2 channel WAY-AX-S touch screen, supply: 18...30 VDC WAY-AX-S-AC touch screen, supply: 115...230 VAC For more information and options please refer to the WAY-AX data sheet. Digital displays for sensors with incremental output LX-EP, 2 channel WAY-DXM-S touch screen, supply:...