- Measurement range from 0.1 up to 150 m - Resolution up to 0.1 mm - Repeatability: ±0.5 mm - Linearity up to ±2 mm - Protection class IP65 - Operating temperature: -10 to +50 °C, optional -40 to +50 °C - Measurement frequency up to 50 Hz - Analog output: 4...20 mA - Digital output: RS232, RS422, Profibus, SSI
Open the catalog to page 1GETTING STARTED For initial operation, the sensor has to be set into operation mode, i.e. the autostart function must be configured. This function decides on the mode generally to be activated after switching on. Single point and continuous measurement (distance tracking) in different modes are available. Before using the analog output, the measurement range must be scaled: 4 mA is assigned to the minimum, 20 mA to the maximum measurement range. All these settings are quickly performed by means of the WayCon configuration software included in the delivery. TYPES OF OUTPUT Analog output 4...20...
Open the catalog to page 3CONFIGURATION SOFTWARE Before starting to work with the LLD-Sensor, the user has to select the operational mode, either via a terminal program (like „Hyperterminal“) or by performing the configuration by means of the conveniently designed user interface of the WayCon software, available in English language. The latter choice uses the serial interface and is therefore possible only for the RS232 or RS422 LLD-Laser sensors (not for the Profibus, SSI version). Please be aware that normal PC’s and Laptops do not have a RS422 interface and hence a RS422/RS232 converter is required. When establishing...
Open the catalog to page 4ACCESSORIES General accessories ZT51_WEISS target board for measurement ranges >30 m 3M 3279 special reflecting foil for measurement ranges >30 m Accessories RS232/RS422-Version KAB-LLD-2M Interface cable 2 m, female, straight KAB-LLD-5M Interface cable 5 m, female, straight KAB-LLD-10M Interface cable 10 m, female, straight 94477 Mating connector M16, female, straight LLD-Aktivierung Pre-configuration of RS232/RS422 version Accessories Profibus/SSI-Version KAB-LLD500-2M-S Power supply cable 2 m, female, straight KAB-LLD500-5M-S Power supply cable 5 m, female, straight KAB-LLD500-10M-S Power...
Open the catalog to page 510 Pages
5 Pages
3 Pages
8 Pages
4 Pages
4 Pages
4 Pages
4 Pages
12 Pages
9 Pages
6 Pages
8 Pages
4 Pages
4 Pages
4 Pages
5 Pages
9 Pages
6 Pages
5 Pages
9 Pages
6 Pages
7 Pages
12 Pages
6 Pages
6 Pages
8 Pages
10 Pages
5 Pages
4 Pages
4 Pages
4 Pages
7 Pages
4 Pages
13 Pages
14 Pages
14 Pages
5 Pages
6 Pages
5 Pages
3 Pages
11 Pages
9 Pages
4 Pages
3 Pages
4 Pages
3 Pages
4 Pages
4 Pages
7 Pages
4 Pages
5 Pages
8 Pages