LZW2 Series Content: Technical Data Electrical Connection Technical Drawing Order Code Options & Accessories Key-Features: - Housing diameter 19 mm - Flexible mounting with brackets, rod end bearings or flange - Available measurement ranges from 25 to 300 mm - Displacement speed <10 m/s - Linearity up to ±0.05 % - Protection class IP60 - Working temperature -30...+100 °C - Life cycle >25x10 meters or >100x10 operations, whichever is less - Simple apparatus according to the EN 60079-11 standard

DIMENSIONS AND ELECTRICAL DATA Measurement range

ELECTRICAL CONNECTION Cable output connection Installation instructions • Please pay attention that the sensor is not used as a variable resistor. brown (V+) yellow (cursor) • Please be careful while calibrating the sensor to set the stroke so that the output signal does not drop below 1 % or exceed 99 % of the supply voltage. It is recommended to keep all sliding parts lubricated, at least every 6 months. TECHNICAL DRAWING LZW2-S: installation with brackets bracket STA075 (2 pieces included in delivery) LZW2-A: installation with rod end bearings rod end bearing SND005 (included in delivery)...

Signal conditioner PMX-24 different analog output signals in one device For further information please contact WayCon or download the data sheet. Subject to change without prior notice. WayCon Positionsmesstechnik GmbH email: [email protected] internet: www.waycon.biz