*mydirectindustry

Linear Potentiometer LRW

1 / 5 PagesView full catalog

Linear Potentiometer LRW

Product catalog summary

Key Features:

Rectangular housing with push rod and thread M6
Measurement ranges from 50 to 900 mm
Linearity of ±0.05%
Displacement speed up to 10 m/s
Protection class up to IP67
Operating temperature range from -30 to +100 °C
Life cycle exceeding 25 million meters or 100 million operations
Compliant with EN 60079-11 standard

Technical Data:

Measurement range options: 50 to 900 mm
Linearity: ±0.05%
Repeatability: 0.01 mm
Resolution: Theoretically infinite, dependent on signal quality
Displacement force: 3.5 to 20 N
Displacement speed: Up to 10 m/s
Acceleration: Max 200 m/s²
Resistance: 5 kΩ for MR ≤650 mm, 10 kΩ for MR ≥750 mm
Protection class: IP60, IP65, IP67
Operating temperature: -30 to +100 °C
Vibration and shock resistance: 5-2000 Hz, 50 g

Electrical Connection:

3-pin and 4-pin connector options
Do not use the sensor as a variable resistor
Calibration should ensure output signal remains between 1% and 99% of supply voltage

Technical Drawing:

Includes dimensions and mounting instructions
Maximum tightening torque: 2.4 Nm

Accessories:

Various connectors and cables for different configurations
Mounting brackets and eye bearings available
Signal conditioner PMX-24 for converting potentiometer signals

Order Code:

Options for connection type, measurement range, and protection class

Contact Information:

WayCon Positionsmesstechnik GmbH
Email: [email protected]
Website: www.waycon.biz
Head Office: Mehlbeerenstr. 4, 82024 Taufkirchen
Office Köln: Auf der Pehle 1, 50321 Brühl

Catalog excerpts

Content: Technical Data Electrical Connection Technical Drawing Accessories Order Code Series LRW Key-Features: - Rectangular housing with push rod and thread M6 - Measurement ranges from 50 to 900 mm 2 -Linearity ±0.05 % 5 - Life cycle >25 x 106 m or >100 x 106 operations, whichever is less - Simple apparatus according to EN 60079-11 standard

Open the catalog to page 1

Notes: • Do NOT use the sensor as a variable resistor! • While calibrating the sensor set the stroke so that the output signal does not drop below 1 % or exceed 99 % of the supply voltage.

Open the catalog to page 2

LRW-...-S, LRW-...-P Useful electrical stroke +3/-0 Groove mounting

Open the catalog to page 3

CON006: mating connector for LRW-M for self assembly, IP65, 4 pins, PG9 cable gland, cable diameter 0 6...8 mm CON006-M12: mating connector adapter to M12 for LRW-M M12 x 1 CON011: mating connector for LRW-B for self assembly, IP40, 5 pis, cable diameter 0 4...6 mm CONOI2: mating connector for LRW-B for self assembly, IP67,5 pis, cable diameter 0 4...6 mm K4P...: connection cable for LRW-IP and CON006-M12 PKIT009: mounting brackets 2 pcs. + screws included in delivery PKIT015: eye bearing Signal conditioner PMX-24 • Converts potentiometer signals into analog output signals: 4...20 mA, 0...10...

Open the catalog to page 4

ACCESSORIESCable with mating connector for LRW-IP, M12, female, 4 pins, IP67 Mating connector for self assembly K4P2M-S-M12 2 m, connector straight, shielded CON006 4 pins, IP65, for LRW-M K4P5M-S-M12 5 m, connector straight, shielded CON006-M12 Adapter to M12 for LRW-M K4P10M-S-M12 10 m, connector straight, shielded CON011 5 pins, IP40, for LRW-B K4P2M-SW-M12 2 m, connector angular, shielded CON012 5 pins, IP67, for LRW-B K4P5M-SW-M12 5 m, connector angular, shielded D4-G-M12-S connector straight, M12, 4 pins, IP67, for LRW-IP K4P10M-SW-M12 10 m, connector angular, shielded D4-W-M12-S connector...

Open the catalog to page 5

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list