LASER SENSORS Powerful sensors to meet growing demands

Measuring principles Introduction Laser sensors by WayCon work according to one of the following three measuring principles. These are the triangulation principle, the runtime measurement and the phase comparison measurement. The LAS, LAR, LAH-G1 and LAM series are triangulation laser sensors, the LAV series utilises the runtime measurement principle and the LLD series works according to the phase comparison principle. Measurement object Laser triangulation principle A laser triangulation sensor emits a beam onto the measurement object. This laser beam is reflected by the target and detected...

Features ► Measurement ranges from 10 mm to 800 mm ► Very precise distance measurement on most materials ► Individual parametrization by teach-in procedure ► Point and line laser versions ► LAS2-TM: very compact housing (37 x 12.4 x 34.5 mm) LAS laser sensors use a built-in micro-controller for a very precise output signal proportional to the distance measured. The small, visible laser point ensures the easy and accurate aiming of the sensor. Distances to rough surfaces can be measured using a fine laser line in place of the laser point. WayCon ► Laser sensors

Features ► Measurement ranges from 4 mm to 400 mm ► Sensors with integrated display ► Settings such as response time, hysteresis or output type configurable via display ► LAR: very compact housing (44 x 20 x 25 mm) ► LAH: diffuse reflection and specular reflection versions The laser sensor of the LAR and the LAH-G1 series allow easy operation even without an external display device. The integrated display enables the user to configure numerous additional functions and parameters such as hysteresis, response time or the energy saving Eco-Modus. 04 WayCon ► Laser sensor

Features ► Measurement range up to 4 mm ► Output: 0...10 V, 4...20 mA, NPN/PNP, Ethernet ► Very high measurement frequency and sampling rate ► Resistant to errors caused by surface structure or colour ► I mmune against environment light up to 10000 LUX Laser sensors of the LAW series stand out with their high measurement frequency and sampling rate. This makes them especially suited for fast and high dynamic applications. Their large number of output types allows for easy integration into nearly every system. WayCon ► Laser sensors 05

Features ► Measurement ranges from 0.05 m to 500 m ► Output: 0/4...20 mA, RS232, RS422, Profibus, SSI, EtherCAT, EtherNet ► Very high range due to phase comparison measurement ► Suited for outdoor applications If even greater distances are measured, this is achieved by means of phase comparison measurement and the LLD series. The LLD sensors are well suited for outdoor applications because of their high protection class and the optional heating system. 06 WayCon ► Laser sensors

Product Overview Draw Wire Sensors Inductive Sensors LVDT Laser Sensors Linear Potentiometer ► Output: potentiometer, analog Digital Magnetic Scales Inductive Sensors Eddy Current Probes Magnetostrictive Transducer Ultrasonic Sensors ► Solid-, hollow- and through hollow shaft ► Outputs: analog, digital, incremental Capacitive Sensors Digital Length Gauges Digital Linear Scales Signal Conditioners and Displays ► Teaching of potentiometer outputs WayCon Positionsmesstechnik GmbH