Content: Introduction Technical Data Technical Drawing Electrical Connection Order Code Series LAV Key-Features: - Measurement range 0.2 to 8 m or 0.2 to 50 m - Linearity ±25 mm 2 - Repeatability <5 mm 4 - Analog output 4...20 mA and switching output - Operating temperature -30 to 50 °C - Individual parametrization by teach-in procedure

INTRODUCTION Laser sensors of the LAV series cover measurement ranges from 0.2 to 50 m. The integrated micro-controller delivers an accurate output signal, which is proportional to the detected distance. External analysers to evaluate the signals are not required. Reliable operation, independent of colour or other influences of the surface, is ensured by sophisticated electronic elements integrated in the system. The small visible laser spot allows a simple and precise orientation of the sensor. MEASUREMENT PRINCIPLE A powerful light source emits short, high-energy pulses, which are reflected...

TECHNICAL DATA LAV-8-420-IO Measurement range Light source Laser class Beam diameter Beam divergence Pulse length Repetition rate laser Measurement output Switching frequency Response time output Signal output push-pull output Power supply 10 % (within the supply tolerance) No-load supply current Time delay before availability Protection class Operating temperature Storage temperature cULus Listed, Class 2 Power Source, Type 1 enclosure connector output M12, 4 pins for measurements on reference target (Kodak white, reflectivity 90 %) for measurement on reflective tape (see accessories) MEASUREMENT...

LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT wavelength: 660nm max. pulse energy: <4nJ pulse duration: 5ns IEC 60825-1: 2007 certified. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Details rotary switch Q1: switching output (push-pull) setting of the switching thresholds A and B Q2: analog output 4...20 mA setting of the min. and max. values A and B For more information please refer to the installation guide. Connector M12, male, 5 pins Q1: switching output (push-pull) setting of the switching threshold A and B...

Reflective tape for LAV-50-420-IO ZT100 Reflective tape, necessary for measurement Digital displays for sensors with analog output, 2 channel WAY-AX-S touch screen, supply: 18...30 VDC WAY-AX-S-AC touch screen, supply: 115...230 VAC For more information and options please refer to the WAY-AX data sheet. Cable with connector (female) M12, 4 poles, shielded K4P2M-S-M12 2 m, straight connector Mating connector (female) M12, 4 poles, shielded D4-G-M12-S straight, for self assembly D4-W-M12-S angular, for self assembly • Attention radiation laser. • Do not stare into beam. • Do not point the laser...