Series LAS-TM Content: Technical Data Technical Drawing Teach-In - Diagrams Order Code Key-Features: - very compact housing - measurement ranges from 10 to 500 mm 2 - linearity up to ±6 pm - point and line laser versions - individual parametrization by teach-in procedure - very precise distance measurement on most materials - protected against reverse polarity and short circuit - analog output 4..20 mA or 0...10 V

Measurement range Minimal teach-in range Light source laser diode red, pulsed Laser class Beam type Beam diameter point laser Beam height line laser Beam width line laser Sensor element photo diode array Measurement frequency Response time Output signal Power-On indicator Alarm indicator Staining indicator Load resistance 80 with output signal 4...20 mA: <0.3 with output signal 0...10 V: >100 Inverse-polarity protection Protection class Working temperature zinc die-casting 1 The values for linearity and resolution are given for a mat white reference surface. ² The detector calculates an optical...

TEACH-IN - DIAGRAMS LINEARITY AND RESOLUTION The following diagrams show the change of the linearity and resolution depending on the teached measurement range. The shorter the teached measurement range, the better the linearity and resolution. MR stands for the teached measurement range. LAS-TM-10 20

Beam type Point laser Line laser (MB 300 and 500 only) ACCESSORIES Cable with mating connector M8, 4 poles, shielded Cable with mating connector M8, 4 poles, shielded Digital displays for sensors with analog output, 2 channel WAY-AX-S touch screen, supply: 18...30 VDC touch screen, supply: 115...230 VAC For more information and options please refer to the WAY-AX data sheet. GENERAL SAFETY INSTRUCTIONS • • • • • Attention radiation laser. Do not stare into beam. Do not point the laser beam towards someone’s eye. It is recommended to stop the beam by a matte object or matte metal shield. Laser...