Powerful sensors to meet growing demands

Introduction With the SX300, WayCon has designed an extremely robust draw wire sensor especially for stroke measurement in hydraulic and telescopic cylinders. With a measuring range of up to 15 metre, the SX300 is ideal for use in "large applications'; such as for stroke measurement in hydraulic weir gates or synchronous monitoring of parallel cylinder arrangements. Features ► Flange-connectible sensor for large, oil-filled hydraulic cylinders ► Housing made from quenched and tempered steel 42CrMo4 ► V2A measuring cable ► Operating pressure up to 300 bar ► Simple installation without central...

Introduction Just like the SX300, the SX200 is designed especially for stroke measurement in hydraulic and telescopic cylinders. However, unlike the SX300, it is not part of the cylinder housing, but is installed directly inside the cylinder head. A digital encoder is flanged on the outside via feedthrough in the pressure-free area, allowing for high-precision measurement of the exact piston position and providing it in the desired output signal. Features ► Installation directly inside of the cylinder head ► Suitable for oil-filled cylinders ► Operating pressure up to 300 bar ► Simple installation...

Introduction Especially when it comes to stroke measurement in smaller cylinders, linear potentiometers and magnetostrictive transducers in a bar construction offer the optimum solution. The sensors are mounted on the inside of the cylinder in the pressure area and are thus protected from any contamination and environmental influences. The contactless measuring principle guarantees a virtually unlimited lifetime. Features ► Contactless, low-wear measuring principle ► Stainless-steel housing ► For operating pressures up to a maximum of 350 bar ► Attachment via a plug-in or threaded flange ► Very...