Draw wire sensors
8Pages

Catalog excerpts

DRAW WIRE SENSORS Powerful sensors to meet growing demands

Features ► Measurement ranges from 50 mm to 42.5 m ► Linearity up to ±0.02 % of full scale ► Protection class up to IP67 ► Temperature -20...+85 °C (optional -40 °C or +120 °C) ► Output: Potentiometer, 0...5 V, 0...10 V, 4...20 mA, RS422 (TTL), HTL, CANopen, SSI, Profibus, EtherCAT, Profinet ► High dynamic: travel speed up to 10 m/s ► High interference resistance ► Optional teachable output 0...5 V and 0...10 V 11 based on the measurement range Description The key component of a draw wire sensor is a highly flexible stainless-steel wire rope, that is single-layered wrapped around an...

Open the catalog to page 2

Features ► Measurement ranges from 1 to 42.5 m ► Linearity ±0.05 % of full scale (with encoder) ► Temperature -20...+85 °C (optional -40 °C) ► Draw Wire Mechanic without sensor element ► Optional with high corrosion protection ► High dynamic: travel speed up to 8 m/s ► Mounting of digital encoder by WayCon, supplied by the customer 11 based on the measurement range Description The inside of the draw wire sensor mechanics is the same as the SX standard series. The F58NK and F58K versions have a clamping flange where the sensor element is typically located. Any incremental and absolute rotary...

Open the catalog to page 3

Introduction Sensors for mobile construction machines must be extremely robust, due to the harsh environmental influences they are exposed to. High demands are placed on low space requirement, high safety performance, shock and vibration resistance, as well as insensitivity to pollution. The MH sensors meet all these requirements. They are the perfect solution for applications in mobile hydraulics. ► Special sensor for mobile hydraulic applications ► Open housing fit for high-pressure cleaning and sea water environment ► Protection class up to IP69k ► Output: potentiometer, 0...5 V, 0...10...

Open the catalog to page 4

Features ► ZX as the world's smallest Draw Wire Sensors with potentiometer or a non-contacting internal hall effect sensing device ► LX as cost-efficient serial under dry conditions ► FX with non-contacting internal hall effect sensing device, ideal for long term applications ► HX with position and speed output, version with hazardous area protection (UL, CSA) and version for sea water (IP68) 11 based on the measurement range Description The WayCon ZX, FX, LX and HX series offer a solution for virtually any application. From large sensors capable of measuring distances of more than 50...

Open the catalog to page 5

Introduction Just like the SX300, the SX200 is designed especially for stroke measurement in hydraulic and telescopic cylinders. However, unlike the SX300, it is not part of the cylinder housing, but is installed directly inside the cylinder head. A digital encoder is flanged on the outside via feedthrough in the pressure-free area, allowing for high-precision measurement of the exact piston position and providing it in the desired output signal. Features ► Installation directly inside of the cylinder head ► Suitable for oil-filled cylinders ► Operating pressure up to 300 bar ► Simple...

Open the catalog to page 6

Introduction With the SX300, WayCon has designed an extremely robust draw wire sensor especially for stroke measurement in hydraulic and telescopic cylinders. With a measuring range of up to 15 metre, the SX300 is ideal for use in "large applications'; such as for stroke measurement in hydraulic weir gates or synchronous monitoring of parallel cylinder arrangements. Features ► Flange-connectible sensor for large, oil-filled hydraulic cylinders ► Housing made from quenched and tempered steel 42CrMo4 ► V2A measuring cable ► Operating pressure up to 300 bar ► Simple installation without...

Open the catalog to page 7

Product Overview Draw Wire Sensors Laser Sensors ►► Output: potentiometric, analog, digital incremental, digital absolute, Bus ►► Triangulation or optical phase comparison Linear Potentiometers Magnetic Scales ►► Output: potentiometric, analog ►► Output: analog, TTL, HTL, SSI, BiSS, 1 Vpp, tachometer Digital Length Gauges Ultrasonic Sensors ►► Output: analog, proximity switch Magnetostrictive Transducers Digital Linear Scales ►► Output: analog, SSI, CANopen, tachometer Capacitive Sensors Encoders/Rotary Transducers ►► Analog Multiturn up to 120 turns ►► Solid-, hollow- and through hollow...

Open the catalog to page 8

Draw wire sensors 8Pages

Catalog excerpts

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures

Draw wire sensors
8Pages