Position Output - Digital CANopen - Multifunctional sensor for extremely rough environments (Position, Velocity, Inclination) - Suitable for marine and offshore, mining, railway applications, commercial vehicles, and construction machinery - Suitable for SIL 2 in accordance with DIN EN 61508 and PL d in accordance with EN 13849-1 (for analog and redundant position signals) - Measurement ranges from 3 to 12 m - Output signals: potentiometer, current, voltage or CANopen, optional redundant output

TECHNICAL DATA Measurement range Draw wire diameter ±0.1 (±0.15 for 5R/10R) see output types below position: potentiometer | velocity: tacho generator | inclination: MEMS Measured dimension Position, optional: velocity, inclination Output signals position Redundant output signals position optional for: potentiometer / 0.5...4.5 V / 0...5 V / 0...10 V / 4...20 mA / CANopen connector output M12 radial or cable output radial (TPE cable) Protection class IP67/IP69K (only with cable output) DIN EN 60068-2-27:2010, 50 g / 11 ms, 100 shocks per direction, 600 shocks total Extraction force Fmin Extraction...

POSITION OUTPUT - DIGITAL CANopen Link to the manual CANopen (WCAN) Communication profile Device profile Encoder, absolute linear; CIA 406 V 3.2.0 Error control Producer Heartbeat, Emergency Message, Node Guarding 1 x TPDO, static mapping Event-triggered, Time-triggered, Sync-cyclic, Sync-acyclic Transmission rate Integrated Bus termination resistor Bus, galvanic separation Supply Current consumption Measurement rate Electrical protection inverse polarity protection Operating temperature Temperature coefficient DIN EN61326-1:2013, conformity with directive 2014/30/EU VELOCITY OUTPUT Output Standard...

INCLINATION OUTPUT Output type Measurement range Sampling rate Output Supply Short-circuit proof (supply) Signal position Position rope outlet for D16K Measurement range

TECHNICAL DRAWING Version cable output Version velocity / inclination 27 Connector Position Connector Velocity / Inclination ACCESSORIES Base plate GX200-BP1 Contains the following: 2 x base plate GX200-BP1 8 x washer DIN9021, M8, A4 12 x cylinder head screw DIN7984, M6x14, A4 8 x cylinder head screw DIN912, M8x20, A4 Please note the connector / cable orientation (options K1, K2, K3)!

ACCESSORIES Base plate GX200-BP2 Contains the following: 2 x base plate GX200-BP2 8 x washer DIN9021, M8, A4 12 x cylinder head screw DIN7984, M6x14, A4 8 x cylinder head screw DIN912, M8x20, A4 Please note the connector / cable orientation (options K1, K2, K3)! Protection plate GX200-PC1 Contains the following: 1 x protection plate GX200-PC1, V4A 6 x cylinder head screw DIN7984, M6x10, A4 160 Ball joint head GX200-GK6 (for rope fixation M6) Contains the following: 1 x Ball joint head M6, V4A 1 x nut 934, M6, A4

OPTIONS Option Changed cable or connector orientation (drawing see page 5) Inverted output signal (analog position output only, INR with redundant options only) Description Rope bridge points to the right: Standard: cable or connector output shows to the left K1: cable or connector output shows downwards K2: cable or connector output shows to the right K3: cable or connector output shows upwards The analog signal of the sensor is increasing by extracting the rope (standard). Option IN inverts the signal, i.e. the signal of the sensor declines by extracting the rope. IN: inverted output signal...

Single position output signal

ORDER CODE GX200 Measurement range MR [m] 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 Wire rope Diameter 1 mm (on request) Diameter 1.6 mm (Standard) Diameter 2 mm (on request) Output signal Potentiometer Potentiometer Potentiometer Voltage Voltage Voltage Current Digital Connection Connector output M12, radial 1) Cable output, radial, 2 m 1) Cable output, radial, 5 m 1) Cable output, radial, 10 m 1) Version Standard Sensor with options Analog outputs: 4 pole WCAN or Option R4: 5 pole Options R1, R2, R3: 8 pole Option TG or NGV/NGA: additional 4 pole (see page 5) Options TG and NGV/NGA: additional...

GX200-BP1 Base plate version 1 GX200-PC1 Protection plate GX200-BP2 Base plate version 2 GX200-GK6 Ball joint head for rope fixation M6 WAY-AX-S touch screen, supply: 18...30 VDC WAY-AX-AC touch screen, supply: 115...230 VAC For more information and options please refer to the WAY-AX data sheet. Subject to change without prior notice. WayCon Positionsmesstechnik GmbH Email: [email protected] Internet: www.waycon.biz