*mydirectindustry

Draw Wire Sensor FX-HM

1 / 4 PagesView full catalog

Draw Wire Sensor FX-HM

Product catalog summary

Key Features:

Wear-free Hall-effect sensor element
Ultra-compact body with a diameter of 38.1 mm
Suitable for applications with high cycle numbers
Measurement ranges from 50 to 375 mm
Linearity of ±1% of full range
Output signal of 0 to 10 V
Lightweight at 35 g
Draw wire made of stainless steel, optionally jacketed
Thermoplastic body

Technical Data:

Measurement ranges: 50 to 375 mm
Linearity: ±1%
Repeatability: ±0.03%
Resolution: 0.024%
Output signal: 0 to 10 VDC
Output impedance: max. 10 Ω
Output load: min. 100 kΩ
Power supply: 4.9 to 30 VDC
Excitation current: max. 30 mA
Protection class: IP52
Humidity: 95%, non-condensing
Operating temperature: -25 to +75°C
Storage temperature: -50 to +80°C
Shock resistance: 50 g, 0.1 ms max.
Vibration resistance: 15 g, 0.1 ms max.
Life cycle: approx. 6,000,000 cycles
Extraction force: nominal 1.5 N
Housing: thermoplastic body
Draw wire: Nylon jacketed stainless steel Ø 0.46 mm or stainless steel Ø 0.41 mm
Weight: 35 g

Technical Drawing:

Includes dimensions and specifications for the draw wire attachment and fittings.

Electrical Connection:

Cable output options with open ends or connectors
Pin assignment for connector output
Accessory cables available with mating connectors

Warning Notices:

Avoid letting the rope snap back to prevent injuries and device damage.
Do not exceed the specified measurement range.
Do not open the device to avoid injury from spring drive energy.
Avoid touching the rope during operation.
Use a deflection pulley to guide the rope over edges.
Do not operate with a buckled or damaged rope.

Order Code:

Options for measurement range, draw wire type, connection type, cable length, and draw wire attachment.

Accessories:

Connection cables with mating connectors available in various lengths.
Digital displays for sensors with analog output available.

Contact Information:

WayCon Positionsmesstechnik GmbH, with contact details for head office and Köln office.

Catalog excerpts

Content: Technical Data Technical Drawing Electrical Connection Warning Notices Order Code Accessories Series FX-HM Key-Features: - Wear-free Hall-effect sensor element - Ultra-compact body, 038.1 mm 2 - ideal for applications with very high cycle numbers 2 - Measurement ranges from 50 up to 375 mm 3 - Linearity ±1 % of full range 4 - Draw wire: stainless steel, jacketed stainless steel - Thermoplastic body

Open the catalog to page 1

TECHNICAL DATA Measurement ranges Linearity Sensor element Hall-Effect sensor Output signal Output impedance max. Output load min. Power supply cable output with open ends, cable output with connector at cable end with or without mating connector Protection class Reverse polarity protection Operating temperature Storage temperature Shock resistance Vibration resistance Life cycle Extraction force thermoplastic body Draw wire Nylon jacketed stainless steel Ø 0.46 mm / optional: stainless steel Ø 0.41 mm based on the measurement range front side back side Draw wire attachment Ø 5.74 Ø 3.02 leader...

Open the catalog to page 2

ELECTRICAL CONNECTION Cable output Pin assignment connector output Connection cable Connector output option C Connector output option K cable from sensor cable from sensor connector connector mating connector Accessory: cable with mating connector 10248-xM (x = length in m) WARNING NOTICES • Don’t let the rope snap back. If the rope is retracted freely, this may lead to injuries (whiplash effect) and the device may be damaged. Caution when unhooking and retracting the rope into the sensor. • Never exceed the specified measurement range when extracting the rope! • Do not try to open the device....

Open the catalog to page 3

ORDER CODE FX-HM Connection type cable with open ends connector at cable with mating connector con. at cable without mating connector Cable length fixed cable 0.15 m 0.5 m 1m 2m Draw wire Nylon jacketed, stainless steel, Ø 0.45 mm stainless steel, Ø 0.41 mm Draw wire attachment eye fitting leader wire rope with fitting ACCESSORIES Connection cable for option K Digital displays for sensors with analog output, 2 channel 1 m, with mating connector touch screen, supply: 18...30 VDC 2 m, with mating connector touch screen, supply: 115...230 VAC 3 m, with mating connector For more information and options...

Open the catalog to page 4

Draw Wire Sensor FX-HM

Draw Wire Sensor FX-HM

Catalog excerpts

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures