Series MXI51 Key-Features: - Measurement ranges up to 100 m - HTL or TTL output - Unaffected by dust, debris or liquids, IP67 - Hi-flex cable - High performance encoder for linear motors - Operating temperature range from -25 °C to +85 °C

TECHNICAL DATA Sensor MXI51 Measurement range Repeat linearity Line Driver, Push-Pull Output signals Output circuits Edge distance Power supply Protection electrical against inversion of polarity (except 5 VDC version) and short-circuit Protection class Operating temperature range Storage temperature range Housing material Electrical connection Hi-flex cable with open wires or cable with connector M12, 8 pins Gap between sensor/tape (without cover strip) Travel speed max. (mechanical) Travel speed max. (electrical) Magnetic Tape WB50 Length Protection class Operating temperature range Storage...

A Reference sensor „R" B Dust wipers (not included in delivery) C Diagnostic LEDS E: Gap/Speed error (red) R: Reference detection (green) 1: LED 1 (not used) 2: LED 2 (not used)

ORDER CODE MXI51 Output circuits Push-Pull (AB) (HTL) Push-Pull (AB, /AB) (HTL) Line Driver (AB, /AB) (TTL) Power supply 5 VDC ±5 % (L output) 10...30 VDC (Y and YC output) Connections cable output 2 m cable output 5 m cable output 10 m 0.5 m cable + M12 connector 2 m cable + M12 connector Reference points without every 5 mm 1 reference point * WB50 Length Length in meters * X = magnetic tape length in meter, selectable in 0.2 m steps, i.e. 4,4 for 4.4 m Stainless steel cover strip supplied Accuracy class ±85 μm/m ±35 μm/m (up to 30 m) ACCESSORIES Cables and connectors Other accessories M12,...