*mydirectindustry

B36 Incremental Encoder

1 / 5 PagesView full catalog

B36 Incremental Encoder

Product catalog summary

Key Features:

Incremental output options: Linedriver RS422 (TTL-compatible), Push-Pull.
Shaft types: solid or hollow.
Flange types: synchro, clamping, with spring element, stator coupling.
Protection class: shaft IP50, housing IP65.
Temperature range: -20 to +85 °C.
Output frequency: up to 300 kHz.
Rotation speed: up to 12000 r/min.
Materials: solid shaft stainless steel, hollow shaft brass.

Technical Data:

Shaft dimensions vary for solid and hollow types.
Flange types include synchro and clamping with specific dimensions.
Impulse options range from 25 to 2500.
Mechanical speed: 12000 min-1 for solid, 6000 min-1 for hollow.
Protection class and temperature specifications as above.
Shock and vibration resistance according to EN standards.

Electrical Data:

Power supply options: 5 VDC, 8-30 VDC, 5-18 VDC.
Power consumption: typical 40 mA, max 90 mA.
Impulse frequency: max 300 kHz for RS422, 200 kHz for Push Pull.
Signal levels and edge times specified.
Short circuit and reverse polarity protection included.
Compliance with UL and CE standards.

Technical Drawings:

Detailed dimensions for solid and hollow shaft configurations.
Flange types and their specific measurements provided.

Mounting Accessories:

Bellow couplings recommended for flexible connection.
Specific models and dimensions for couplings listed.

Order Code:

Details on flange type, shaft diameter, connection type, impulses, and output signal options.
Encoders with specific configurations have shorter delivery times.

Accessories:

Cables with mating connectors in various lengths and configurations.
Couplings and digital displays for different output types.

Contact Information:

WayCon Positionsmesstechnik GmbH, with addresses and contact details for head office and Köln office.

Catalog excerpts

Content: Technical Data Electrical Data Technical Drawing Mounting accessories Order code Accessories Series B36 Key-Features: - Incremental output: Linedriver RS422 (TTL-compatible), Push-Pull 2 - Shaft types: solid shaft or hollow shaft 2 - Flange types: synchro flange, clamping flange, 3 flange with spring element, flange with stator coupling 4 - Protection class shaft IP50, housing IP65 - Rotation speed up to 12000 r/min - Material: solid shaft stainless steel, hollow shaft brass

Open the catalog to page 1

TECHNICAL DATA Shaft type solid shaft hollow shaft Shaft dimensions Flange type synchro flange Ø 36,5 clamping flange Ø 36,5 with spring element stator coupling Ø 46 Output signal see electrical data below cable output or connector M12, 8 pin Mechanical speed Mass moment of inertia Shaft load capacity Protection class Temperature Shock resistance Vibration resistance Shaft material stainless steel Housing material Weight ELECTRICAL DATA Linedriver RS422 (TTL-compatible) Order code Power supply Power consumption (no load) Permissible load / channel Signal level HIGH Rising edge time tr Falling...

Open the catalog to page 2

TECHNICAL DRAWING SOLID SHAFT Synchro flange Ø 36.5 mm TECHNICAL DRAWING HOLLOW SHAFT Flange with stator coupling Ø 46 mm 44,2 38,9 31,8

Open the catalog to page 3

Flange with spring element, short 36,5 MOUNTING ACCESSORIES Bellow couplings for Encoder with solid shaft 6 Rotary transducers should never be connected to shafts or drives in an inflexible, stiff way. For this reason, we recommend using a coupling between the rotary transducer and the shaft. Bellow couplings are used for the free of backlash connection between an encoder and a shaft. The couplings are free of wear and compensate lateral, axial and angular shaft misalignment. The mounting on the shaft is done by clamping hubs. Never use force to align the rotary angle transducer! MBK-15.5-23-06-06...

Open the catalog to page 4

Flange type [mm] Solid shaft Clamping flange 0 36.5 Synchro flange 0 36.5 Hollow shaft Flange with stator coupling 0 46 Flange with spring element, long Flange with spring element, short Solid / hollow shaft diameter Solid shaft 0 x L [mm] 4 x 10 5 x 10 6 x 12.5 6.35 x 12.5 1) Encoder with solid shaft only Encoders that consist entirely of underlined italic options have a shortened delivery time. Cable with mating connector M12 (female), 8 poles, shielded Mating connector M12 (female), 8 poles, shielded K8P2M-S-M12 2 m, straight connector D8-G-M12-S straight connector for self assembly K8P5M-S-M12...

Open the catalog to page 5

B36 Incremental Encoder

B36 Incremental Encoder

Catalog excerpts

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures