WPF3
WPF3
- High sensitivity starting from 0.2 V/m.
- Isotropic and RMS measurement capabilities.
- Excellent attenuation at 50/60 Hz.
- Compliance with international standards.
- Defense: Assessment of military sites and personnel exposure protection.
- Labs/R&D: RF exposure protection for R&D and personnel labs.
- Industry: Assessment of industrial processes for worker exposure protection.
- Telecommunications: Certification and audit of telecommunication services (GSM, 3G, LTE, TDT, AM, FM, WiFi, etc.).
- Frequency Range: 100 kHz - 3 GHz.
- Sensor Type: Isotropic with RMS diode technology.
- Measurement Range: 0.2 - 130 V/m (CW), 0.2 – 1000 V/m (CW), 0.2 - 20 V/m (RMS).
- Dynamic Range: 52 dB for standard, 74 dB for high power version.
- Sensitivity: 0.2 V/m.
- Resolution: 0.02 V/m (up to 7.5 V/m), < 2% (from 7.5 V/m).
- Frequency Response: ± 1.5 dB (250 kHz – 3 GHz), -3 dB (100 kHz).
- Linearity: ± 0.5 dB (0.5 V/m - 100 V/m).
- Isotropic Deviation: ± 1.2 dB (@ 2 GHz).
- Calibration: ISO 17025 accredited, recommended every 24 months.
- Temperature Range: -20 ºC to 50 ºC.
- Temperature Response: +0.1 / -1 dB (related to 20 ºC).
- Dimensions: 28.4 cm x 6 cm Ø.
- Weight: 95 g.
- Attenuation at 50/60 Hz: > 80 dB.
Catalog excerpts
WPF3 Field Probe 100 kHz - 3 GHz • High sensitivity from 0.2 V/m • Isotropic and RMS measurement • Excellent attenuation at 50/60 Hz • Meets international standards Telecommunications: certification and audit f telecommunication services o (GSM, 3G, LTE, DT, AM, FM, WiFi, etc.). T Industry: assessment of industrial p rocesses for worker’s xposure e protection. Defence: assessment of ilitary m sites and personnel xposure e protection. Labs/R&D: RF exposure protection o f R&D and personnel labs. Technical Specifications WPF3 Frequency range High Power version Sensor type Isotropic RMS diode technology Type of frequency response Measurament range < 2% (starting from 7.5 V/m) Frequency response (*) Isotropic deviation Calibration period Temperature range Temperature response (*) The frequency response can be corrected with the SMP2 by using the correction factors stored in the probe (ISO 17025 accredited calibration). Compatible with SMP2, MonitEM, MapEM Product specifications and descriptions in this document subject to change without notice Safety, Quality, Service
Open the catalog to page 1All WAVECONTROL catalogs and technical brochures
- Measuring device
- Measurement software
- Digital gauge
- Portable gauge
- Industrial measuring module
- Real-time monitoring module
- Measurement monitoring module
- Safety software
- Automatic measuring module
- Continuous monitoring module
- Compact measuring module
- Laboratory measuring instrument
- High-precision gauge
- USB measuring module
- Benchtop monitoring system
- Ethernet monitoring module
- Compact monitoring module
- Process probe
- Field measuring instrument
- Measuring instrument with data logger