WAVE ball units
1 / 55Pages

Catalog excerpts

WAVE ball units - 5

4 / Bearings for lightweight conveyor rollers

Open the catalog to page 5
WAVE ball units - 6

How do you calculate the load on ball elements? Each implemented project requires the selection of appropriate ball elements that will meet the load capacity requirements. Therefore, we have created the instruction below that will allow you to choose exactly what you need. The information contained here is a guarantee of selection of balls with the appropriate load capacity, and thus - smooth operation without failure. Calculation of the load capacity for ball elements with horizontal movement of cargo. The load factor in the ball elements is 1.3, which means that at least 3 ball elements...

Open the catalog to page 6
WAVE ball units - 7

ways of mounting / screw-on unit mounting with two screws or four.

Open the catalog to page 7
WAVE ball units - 9

ways of mounting / threaded-pin unit

Open the catalog to page 9
WAVE ball units - 11

KU transport balls are designed to carry smaller loads, not faster than 1 m/s. These loads range from 5kg to 70kg. The casing of this kind of elements is made of steel sheet, which is galvanized to extend its durability and protect it against the effects of atmospheric conditions. Inside the elements prepared in this way, high-quality steel balls are placed, and the whole allows smooth movement of the components on the surface of the ball table. Balls should be mounted on ball tables in cut out holes.

Open the catalog to page 11
WAVE ball units - 12

wave@wave.info.pl www.wave.info.pl

Open the catalog to page 12
WAVE ball units - 13

High-quality KO transport balls allow you to transfer loads from 30kg to 1400kg, no faster than 1 m/s. The steel balls are chromed, which increases their resistance to weather conditions. They are placed in specially prepared chrome casings, lathed from a full steel rod. This element allows smooth movement of objects on the surface of the ball table. Balls should be mounted on ball tables in cut out holes.

Open the catalog to page 13
WAVE ball units - 14

wave@wave.info.pl www.wave.info.pl Type REF. No. Dynamic load Static load Weight 1 pcs KO-15 Type REF. No. Dynamic load 0,060kg KO-22 Type REF. No. Dynamic load Static load Weight 1 pcs KO-25 Type REF. No. Dynamic load Static load Weight 1 pcs

Open the catalog to page 14
WAVE ball units - 15

wave@wave.info.pl www.wave.info.pl Type REF. No. Dynamic load Static load Weight 1 pcs

Open the catalog to page 15
WAVE ball units - 16

KP transport balls are high-quality elements that allow you to transfer loads of different sizes, weighing from 30kg to 1400kg, not faster than 1 m/s. Their casing is lathed from a full steel rod, and each element is properly secured. To protect against the effects of weather conditions, they are being chromed. This significantly affects the durability of the casing. Inside the prepared components high-quality steel balls are placed, also chrome-plated. In this way, it is possible to move objects smoothly over the surface of the ball table. The balls can be mounted on the ball tables in any...

Open the catalog to page 16
WAVE ball units - 17

wave@wave.info.pl www.wave.info.pl 1 / Push-fit unit KP-12 Type REF. No. Dynamic load Static load Weight 1 pcs KP-15 Type REF. No. Dynamic load Static load Weight 1 pcs KP-22 Type REF. No. Dynamic load Static load Weight 1 pcs KP-25 Type REF. No. Dynamic load Static load Weight 1 pcs

Open the catalog to page 17
WAVE ball units - 18

wave@wave.info.pl www.wave.info.pl Type REF. No. Dynamic load Static load Weight 1 pcs

Open the catalog to page 18
WAVE ball units - 19

KU-IK push-fit balls Standard KU-IK transport balls allow you to move elements weighing from 5kg to 70kg, not faster than 1 m/s. High-quality balls are made of AISI 304 stainless steel, thanks to which they have an increased resistance to moisture. They are suitable for use in harsh environments where water and cleaning agents are in contackt with main ball. The balls are placed inside a pressed steel sheet casing. Galvanizing of such elements increases their protection against atmospheric conditions The ball should be mounted on ball tables in cut out holes.

Open the catalog to page 19
WAVE ball units - 20

wave@wave.info.pl www.wave.info.pl

Open the catalog to page 20
WAVE ball units - 21

KU-I transport balls are entirely made of stainless steel. These high-quality components can carry loads ranging from 5kg to 70kg, not faster than 1 m/s. The casing of these balls units is pressed from AISI 304 stainless steel, which works well in an aggressive environment. The high durability of the product enables work in contact with water, cleaning agents and food industry. Inside such a resistant casing a high-quality stainless steel ball is placed. The ball should be mounted on ball tables in cut out holes.

Open the catalog to page 21
WAVE ball units - 22

wave@wave.info.pl www.wave.info.pl

Open the catalog to page 22
WAVE ball units - 23

Ball units with a spring KO-S The balls transfer loads up to 60kg to 150kg not faster than 1 m/s. The spring starts working with the load indicated in the tables. The ball housing is CNC machined from a full steel bar and then protected against environment conditions by chrome plating significantly extends its durability. A spring is installed in the center of the housing, which absorbs impacts during operation. Inside, there are chrome-plated steel balls, which facilitate smooth movement of components on the top of the ball table. All this makes the balls work for a long time, failure-free...

Open the catalog to page 23
WAVE ball units - 24

wave@wave.info.pl www.wave.info.pl Type REF. No. Dynamic load Static load Weight 1 pcs KO-22 S Type REF. No. Dynamic load Static load Weight 1 pcs Type REF. No. Dynamic load Static load Weight 1 pcs

Open the catalog to page 24
WAVE ball units - 26

KU-T balls with threaded pin KU-T standard transport balls with threaded pin, hand-tightened, are designed for light and simple work.They can carry a load in the range of 25kg to 35kg, not faster than 1 m/s. The balls are made of steel and then placed and pressed in a steel casing. This one is also pressed from steel sheet, properly protected against weather conditions. Such a result is obtained by galvanizing, which significantly extends the durability of the elements. This economic solution allow the simple movement of various things on the surface of the ball table. The balls are...

Open the catalog to page 26
WAVE ball units - 27

wave@wave.info.pl www.wave.info.pl

Open the catalog to page 27
WAVE ball units - 28

KO-T balls with threaded pin KO-T transport balls with a threaded pin are designed to transfer loads from 10kg to 500kg, not faster than 1 m/s. Their casing is made of a full steel rod, which is properly protected from weather conditions. This is done by chroming the elements, which significantly extends their durability. High-quality balls are placed inside, also chromed, which together allows smooth movement of objects on the surface of the table. The ball can be mounted on ball tables in threaded or pass-through holes, secured with a nut from below.

Open the catalog to page 28