1. Catalogs
  2. Waukesha Cherry-Burrell
  3. W60 Series Shut-off & Divert Valves

W60 Series Shut-off & Divert Valves

W60 Series Shut-off & Divert Valves
1 / 28 PagesView full catalog

W60 Series Shut-off & Divert Valves

Product catalog summary
Application
The W60/W80/W90 series shut-off and divert valves are designed for stopping or diverting flow in process systems. They are available in sizes from 1" to 6" OD and can be operated pneumatically or manually, with various body configurations to suit different applications.
Materials
Product wetted parts are made from ASTM 316L stainless steel, while non-product parts use ASTM 304. The standard seat material is Tef Flow™ with options for other materials. Elastomers include standard FKM, with EPDM and FFKM as options. The finish is <32Ra, with other finishes available upon request.
Pressure Ratings
Pressure ratings vary by size and temperature, with maximum pressures ranging from 150 PSI for 6" valves at 250°F to 500 PSI for 1" valves at 70°F. High-pressure adapters and clamps are available for certain sizes, with specific ratings provided for each.
Options and Accessories
Various seat types are available for different temperature and pressure applications, including Tef Flow™, Tri Ring, Metal, and Bonded options. Control tops offer features like transparent design, ease of maintenance, and compatibility with industry-standard electrical components.
Typical Product Applications
The valves are suitable for a wide range of applications in the beverage, food, dairy, pharmaceutical, and chemical industries, handling products like beer, milk, emulsions, and adhesives.
Features and Benefits
Control tops provide clear visibility of electrical components, ease of operation, and reliability. They include features like manual override solenoids, LED position indication, and compatibility with various field bus networks.
Actuator Options
Actuators are available in different configurations, including air to raise, air to lower, and air to air, with options for heavy-duty springs and long strokes. Specific dimensions and configurations are provided for each actuator type.
Body Configurations
The document details various body configurations for shut-off and divert valves, including dimensions and specific configurations for different valve series.
Specifications and Procedures
The document provides detailed specifications for valve and actuator sizes, including pressure ratings in PSI and Bar for various configurations. It outlines the conditions under which actuators will open or hold closed against specific pressures, with tables listing these values for different valve sizes and actuator types.
Pressure Ratings and Requirements
Standard air supply requirements are specified as 50 PSI for 4, 5, and 6-inch actuators, with 75 PSI for heavy-duty spring actuators. The document advises consulting the factory for pressure ratings higher than those documented.
Construction and Materials
The valves are constructed from 316L Stainless Steel, designed for sanitary applications with minimal internal crevices and high surface finishes. They feature free-spinning, snap-on seats and captive seals, compliant with 3-A and FDA standards.
Flexibility and Modularity
The valves are modular, allowing for easy assembly or retrofitting to meet specific applications. They offer a choice of actuators and body sizes, with options for custom port lengths and dimensions to match existing systems.
Cost and Maintenance
The design minimizes proprietary parts, ensuring low cost and availability of spares. The modular design facilitates easy maintenance and training, with a focus on long service life and low cost of ownership.
Adapters and Extensions
The document describes various adapters, such as the W60 and W80, which enhance the valve's pressure rating and adaptability for different applications, including vacuum-rated and extended shelf-life uses.
Recommendations
For applications requiring higher pressure ratings or specific configurations not listed, it is recommended to contact the factory for guidance. The document emphasizes the importance of adhering to specified pressure limits to ensure safety and performance.
See more

Catalog excerpts

W60 Series Shut-off & Divert Valves-2

Engineering excellence, allied to W60/W80/W90 Series Shut Off & Divert Valves stringent quality control, ensures that SPX’s unrivalled range of WCB products growing pressure worldwide to deliver A P P L I CAT I O N When stopping or diverting flow in a process system, the W60 single seat valve line provides both a flexible and reliable solution. These valves are pneumatically or manually operated, and offered in a wide variety of body configurations. safe, high quality food, all SPX products complies with the highest international standards for hygiene. In the light of are designed for easy cleanability,...

 Open the catalog to page 2
W60 Series Shut-off & Divert Valves-3

Typical Product Applications H igh P ressure A dapter and C lamps Beer Cider Fruit Drinks Liquid Sugar and Glucose Soft Drinks Wine Wort Note: 3, 4 or 6 inch high pressure clamp not available. W90 not available in high-pressure arrangements. For other valve types contact factory. For all valve options see Valve Key Datasheet (DS-1204). Food Animal Oils Flavorings Pet Food Soups and Sauces Vegetable Juices Vegetable Oils Vinegars Dairy Cream Standard seat o f ch o i c e . General Purpose, >90% of applications H i g h Te m p High Pressure Pressure Relief Oper. 280/137EPDM Steril. 275/135EPDM Oper....

 Open the catalog to page 3
W60 Series Shut-off & Divert Valves-4

Control Tops WAU K E S H A C H E R RY- B U R R E L L control top Features And Benefits • Transparent Control Top keeps all electrical components visible. • Maintainable, designed with the user in mind, making assembly and troubleshooting worry free and easy. • Waukesha Cherry-Burrell uses the industry’s most widely recognized electrical components, so access to off the shelf replacement parts is easy, ensuring quick delivery and less down time. • NEMA 4x (IP64) • Stainless Steel Control Top Option Connector Options • S/O Cord Grip for hard wire (std) • Quick Disconnect Pin Connectors Interface...

 Open the catalog to page 4
W60 Series Shut-off & Divert Valves-5

8 6 8 1 control top Features And Benefits • Contact free position sensor including (3) programmable feedback signals • Positions easily taught via intuitive push buttons or Autotune feature to ensure quick & easy set-up • Ultra-bright 360° visual LED position indication with adjustable red, yellow, & green color assignments provide clarity from all points of view and avoid confusion • Manual override and air throttle adjustable solenoids to assist start-up, maintenance, and troubleshooting • Up to IP69K washdown rating available (IP65/67 as standard) for high washdown environments • Built-in...

 Open the catalog to page 5
W60 Series Shut-off & Divert Valves-6

All ”A” Dimension are in fully extended (open) position. H - Hand Lock HLG -Hand Lock, long stroke 6YLG - Hand Lock *For sizing Over-Pressure valves, select a Heavy-Duty spring actuator with a holding pressure greater than the desired relief pressure. Designate with the “R” the valve model (i.e. WR61) and actuator size (i.e. 5RHAR). Refer to DS-1224 for more details on Over-Pressure Valves. **A, B, and C maintenance free actuators are only available on W60 and W80 series valves. These have only standard spring and stroke options. The actuator spring action is easily reversible in the field. C...

 Open the catalog to page 6
W60 Series Shut-off & Divert Valves-7

4AR - 4" (101mm) Air to Raise 4HAR - 4" (101mm) Air to Raise, Heavy Duty Spring 4RHAR* - 4" (101mm) Air to Raise, Spring Adjustable, Heavy Duty Spring 4ARLG - 4” (101mm) Air to Raise, Long Stroke 4AL - 4" (101mm) Air to Lower 4HAL - 4" (101mm) Air to Lower, Heavy Duty Spring 4RHAL* - 4" (101mm) Air to Lower, Spring Adjustable, Heavy Duty Spring 4ALLG - 4” (101mm) Air to Lower, Long Stroke 4AA - 4" (101mm) Air to Air 4AALG - 4" (101mm) Air to Air, Long Stroke 5AR - 5" (127mm) Air to Raise 5HAR - 5" (127mm) Air to Raise, Heavy Duty Spring 5RHAR* - 5" (127mm) Air to Raise, Spring Adjustable, Heavy...

 Open the catalog to page 7
W60 Series Shut-off & Divert Valves-8

W61 and W63 Shut-off - One Piece Bodies SEE PAGE 6 FOR ACTUATOR OPTIONS

 Open the catalog to page 8
W60 Series Shut-off & Divert Valves-9

SEE PAGE 6 FOR ACTUATOR OPTIONS

 Open the catalog to page 9
W60 Series Shut-off & Divert Valves-10

Pressure Loss Curves W80 and W90 valves are charted below under corresponding W60 header. Curves are based on water 70ºF (21°C). *Note: For W61 S to S curves see W62 T to T curves.

 Open the catalog to page 10
W60 Series Shut-off & Divert Valves-12

W61 & W64r Holding Pressure Charts W80 and W90 Holding Pressures are charted under the corresponding W60 header. W90 Maximum Operating Pressure is 100 PSI. • If pressure rating is higher than documented in tables consult factory before exceeding. • Normal air supply requirement: 50 PSI for 4, 5, and 6 inch, A, B, and C size actuators and long stroke actuators; 75 PSI for 4, 5, and 6 inch heavy duty spring actuators. • For sizing Over-Pressure valves, select a Heavy-Duty spring actuator with a holding pressure greater than the desired relief pressure. Designate with the “R” valve model (i.e. WR61)...

 Open the catalog to page 12
W60 Series Shut-off & Divert Valves-13

W 6 1 A R ( air - to - raise ) - long S troke W 6 1 A L / H A L ( air - to - lower ) - S tandard S troke

 Open the catalog to page 13
W60 Series Shut-off & Divert Valves-14

W 6 1 A L ( air - to - lower ) - Long S troke W 6 1 Y- B ody ( air - to - lower ) - E xtra Long S troke

 Open the catalog to page 14
W60 Series Shut-off & Divert Valves-15

W62 Holding Pressure Charts • If pressure rating is higher than documented in tables consult factory before exceeding. • Normal air supply requirement: 50 PSI for 4, 5, and 6 inch actuators and long stroke actuators 75 PSI for 4, 5, and 6 inch heavy duty spring actuators. • Please contact the factory for holding pressure values not listed. W 6 2 A R / H A R ( air - to - raise ) - S tandard S troke Actuator S i z e s i de p o r t ( p 2 ) , a i r to act uato r ( w i t h st e m r a i s ed ) , s p r i ng w i l l lowe r ag a i n st :

 Open the catalog to page 15
W60 Series Shut-off & Divert Valves-16

W 6 2 A R / H A R ( air - to - raise ) - S tandard S troke ( continued ) W 6 2 A R ( air - to - raise ) - long S troke

 Open the catalog to page 16
W60 Series Shut-off & Divert Valves-17

W 6 2 A L ( air - to - lower ) - Long S troke W 6 2 A L / H A L ( air - to - lower ) - S tandard S troke

 Open the catalog to page 17
W60 Series Shut-off & Divert Valves-18

W 6 2 A L / H A L ( air - to - lower ) - S tandard S troke ( continued )

 Open the catalog to page 18
W60 Series Shut-off & Divert Valves-19

W63 & 64 Holding Pressure Charts • If pressure rating is higher than documented in tables consult factory before exceeding. • Normal air supply requirement: 50 PSI for 4, 5, and 6 inch actuators and long stroke actuators 75 PSI for 4, 5, and 6 inch heavy duty spring actuators. • 1For sizing Over-Pressure valves, select a Heavy-Duty spring actuator with a holding pressure greater than the desired relief pressure. Designate with the “R” valve model (i.e. WR61) and actuator size (i.e. 5RHAR). • Please contact the factory for holding pressure values not listed. W 6 3 A R / H A R ( air - to - raise...

 Open the catalog to page 19

All Waukesha Cherry-Burrell catalogs and technical brochures

  1. Manual Valves

    12  Pages

  2. C-Series

    8  Pages

  3. Votator® I

    12  Pages

  4. CR Mixer_2016

    2  Pages

  5. DTL Blender

    26  Pages

  6. Colloid Mill

    2  Pages

  7. Shear Pump

    2  Pages

  8. Shear Pumps

    2  Pages

  9. Colloid Mills

    2  Pages

  10. BPE Fittings

    32  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.