Universal 1 PD Pump Seals REFERENCE CHART Standard O-ring Selections, Descriptions and Color Codes for WCB Brand Pumps NOTES: CTD = Coated Steel; SS = Stainless Steel 1. Pumps manufactured up through 1993 may take STD030005 instead (used old-style shafts). Verify serial no. to confirm. 2. 101811+ is used with bearing isolators. If isolator is needed, use part # X06639 (no kit available). Check gearcase s/n. 3. Isolator kit X06634-2 contains 101813+ bearing retainer. 4. 101810+ bearing retainer is used with 101716+ grease seal. 5. 123531+ is available until stock is depleted, then will be replaced by 121828+. 6. 101812+ is used on AP and SP pumps. This part is used with bearing isolators; for std. lip seal, use part # 121828+. Based in Charlotte, North Carolina, SPX FLOW, Inc. (NYSE: FLOW) is a multiindustry manufacturing leader. For more information, please visit www.spxflow.com To Order Seals or Other Genuine Pump Parts, Contact Your Authorized Waukesha Cherry-Burrell Distributor > Waukesha Cherry-Burrell* SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. For more information visit www.spxflow.com. The green “>” and “x” are trademarks of SPX FLOW, Inc. ISSUED 12/2017 PP-002 COPYRIGHT © 2017 SPX FLOW, Inc.