Series 1L, 1XL, 10L
2Pages

{{requestButtons}}

Catalog excerpts

Series 1L, 1XL, 10L - 1

ES-10L/100XL For Water Heater and Hot Water Storage Tank Applications Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor –––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– Series 1L, 1XL, 10L and 100XL Temperature and Pressure Relief Valves A.S.M.E Rated*, CSA Listed. Self-closing T&P Relief Valves for Water Heaters up to 105,000 BTU/Hr. 10L 100XL The combined 2 in 1 T&P relief valve provides the least expensive and proven means for protection against both excessive temperature and pressure emergency conditions. Provides fully automatic temperature and pressure relief protection for hot water storage tanks and heaters up to 105,000 BTU/HR. Series 10L furnished with test lever and short thermostat for installation directly in tank tapping. Series 100XL furnished with test lever and extension thermostat for installation in the hot water outlet line or directly in the tank tapping. Temperature sensing element must be immersed in the water within the top 6" (152mm) of the tank. Male inlet and female outlet. Temperature relief 210°F (99°C). Standard settings 75, 100, 125, 150psi (5.3, 7.0, 8.8, 10.6 bar). Features Specifications T&P valves Each water heater and hot water storage tank shall be equipped with a CSA and A.S.M.E. Rated* automatic temperature and pressure relief valve to protect the heater from excessive pressure and temperature. The device shall be ANSI Z21.22 certified. The BTU discharge capacity of the device shall be in excess of the BTU input rating of the heater. Watts Regulator Company No. 1L, 1XL, 10L or 100XL. • Series 1L, 1XL Size 1⁄2" (15mm) 10L, 100XL Size 3⁄4" (20mm) • A.S.M.E. Rated*, CSA Listed • Features a unique thermostat with special thermo-bonded coating • An all bronze body • Stainless steel spring • Thermostat is accurate and proven. Exclusively designed and manufactured by Watts Options • For tanks and heaters with extra thick insulation, send for literature ES-SL100XL/L100XL/LL100XL/LLL100XL • Series 100XL-8 with 8" (200mm) extension thermostat • SOLAR - Series 100XL or 1XL; specify Model Z9 for stainless steel lever and pin for outside solar applications. Model Z11 for 180°F (82°C) thermostat • Series 1L, 1XL Size 1⁄2" (15mm): For both temperature and pressure relief protection. Series 1L has short thermostat and test lever. Series 1XL has extension thermostat with thermobonded coating. Also available with 8" (200mm) extension thermostat WARNING: Following installation, The valve lever MUST be operated AT LEAST ONCE A YEAR to ensure that the water-ways are clear. Certain naturally occurring mineral deposits may adhere to the valve, rendering it inoperative. When manually operating the lever, water will discharge and precautions must be taken to avoid contact with hot water and to avoid water damage. BEFORE operating lever, check to see that a discharge line is connected to this valve directing the flow of hot water from the valve to a proper place of disposal otherwise personal injury may result. If no water flows, valve is inoperative. TURN OFF THE WATER HEATER AND CALL A PLUMBER IMMEDIATELY. This device is designed for emergency safety relief and shall not be used as an operating control. IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS * Series 1L and 1XL Valves are not A.S.M.E. Listed or Rated. Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Open the catalog to page 1

All Watts Water Technologies catalogs and technical brochures

  1. Ball Valves

    28 Pages

  2. Series X65B

    2 Pages

  3. Steam Products

    24 Pages

  4. 008 PCQT

    2 Pages

  5. Series 17

    1 Pages

  6. Series 152SS

    2 Pages

  7. Series 152A

    2 Pages

  8. Series 150A

    2 Pages

  9. Series 1450F

    1 Pages

  10. Series 144

    2 Pages

  11. Series 142

    2 Pages

  12. Model 127W

    2 Pages

  13. ES-127

    2 Pages

  14. Series 123LP

    1 Pages

  15. Series 1156F

    2 Pages

  16. Series 100DT

    1 Pages

  17. Series 05

    2 Pages

  18. Series 007

    4 Pages