ES-17 For Liquid and Steam Service Job Name ––––––––––––––––––––––––––––––––––––––––––––– Contractor – –––––––––––––––––––––––––––––––––––––––––––– Job Location – ––––––––––––––––––––––––––––––––––––––––– – Approval ––––––––––––––––––––––––––––––––––––––––––––––– Engineer – ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––– Approval – ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––– Series 17 In-line Bronze Single Union Strainers Sizes: 3⁄4" – 1" (20 -25mm) Series 17 In-line Bronze Single Union Strainers are designed to protect system components from dirt, rust and other damaging debris in the piping system. This series is ideal for quick removal from equipment for cleaning or where feed line separation is required. 17 Performance Data Features • Bronze body • Single union end • Buna-N union seal • NPT threaded female end connections Pressure – Temperature size (DN) 10gpm 20gpm kPa 30gpm psi 40gpm in. mm psi kPa psi kPa psi kPa 3⁄4 20 0.4 2.8 1.5 10.3 3.8 26.2 6.0 41.4 1 25 0.3 2.1 1.0 6.9 50gpm psi 60gpm kPa psi 8.9 61.4 – kPa – 2.4 16.5 4.0 27.6 6.0 41.4 8.1 55.8 Maximum Working Pressure: 250psi (17.2 bar) WOG @ 180ºF (82ºC) A 50psi (345kPa) WSP @ 280ºF (138ºC) Specifications An in-line bronze strainer to be installed as indicated on the plans. The strainer must have a single union end and NPT threaded female end connections. Strainer shall be rated to 250psi (17.2 bar) WOG @ 180ºF (82ºC); 50psi (345 kPa) WSP @ 280ºF (138ºC). Strainer shall be a Watts Regulator Company Series 17. B Materials Body: Cast Bronze Union Seal: Buna-N Screen: 40 Mesh* Stainless Steel *Consult factory for additional screen options. Sizes 3⁄4” 1” .4 1.5 3.8 6.0 8.9 NR (psi) Flow-gpm 10 20 30 40 50 60 .3 1.0 2.4 4.0 6.0 8.1 Dimensions — Weights Size (dn) Dimensions in. mm A weight B in. mm in. mm lbs. kgs. 34 ⁄ 20 43⁄8 111 23⁄8 60 1.8 0.7 1 25 43⁄8 111 23⁄8 60 1.8 0.7 Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca ES-17 0851 Water Safety & Flow Control Products © Watts, 2008