FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of...

Air Line Coalescing Filters Air Line Filter / Regulators Relief Valves - Diaphragm Type Polycarbonate bowls, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor temperatures outside of the rated range. As with most plastics, some chemicals can cause damage. Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where...

Twist \ Automatic Drain Drain • Excellent water removal efficiency. • Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt • Easily disassembled for servicing without the automatic pulse drains. • High Flow: 1/8" - 22 SCFM§ Automatic Drain Distance Required Standard part numbers shown bold. For other models refer to ordering information below. * For polycarbonate bowl see Caution on page 1. § SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop. t With Automatic Pulse Drain Ordering Information Polycarbonate Bowl Twist Drain...

Technical Information Primary Pressure - PSIG Flow - SCFM Primary Pressure • Primary Pressure • Flow - SCFM 14F Filter Kits & Accessories Bowl Kits - Filter Element Kits - Pressure & Temperature Ratings - Polycarbonate Bowl - 0 to 150 PSIG (0 to 10.3 bar) Metal Bowl - 0 to 250 PSIG (0 to 17.2 bar) Automatic Pulse Drain - 10 to 250 PSIG (0.7 to 17.2 bar) Metal (Zinc) Bowl w/o Sight Gauge Drains -Twist Drain - Automatic Pulse Drain - Pneumatic Division Richland, Michigan

10F Coalescing Filters - Miniature • Removes liquid aerosols and sub-micron particles • Liquids gravitate to the bottom of the element and will not re-enter the airstream. • Oil free air for critical applications, such automatic pulse drains. • High Flow: Grade 6 Element Automatic Drain Distance Required Drain Option Standard part numbers shown bold, with Grade 6 Elements (for Grade 10 Elements, replace "E" with "H" in the 6th position). For other models refer to ordering information below. * For polycarbonate bowl see Caution on page 1. § SCFM = Standard cubic feet per minute at 90 PSIG inlet...

Coalescing Filters (Oil Removal) Technical Information Primary Pressure - PSIG Primary Pressure - PSIG 35 PSIG 90 PSIG 150 PSIG Flow - SCFM Flow - SCFM Primary Pressure - PSIG 35 PSIG 90 PSIG 150 PSIG Primary Pressure - PSIG 35 PSIG 90 PSIG 150 PSIG Flow - SCFM Flow - SCFM 10F Coalescing Filter Kits & Accessories Bowl Kits - Media Specifications (Element should be replaced) Pressure & Temperature Ratings - Polycarbonate Bowl - 0 to 150 PSIG (0 to 10.3 bar) Metal Bowl - 0 to 250 PSIG (0 to 17.2 bar) Metal (Zinc) Without Sight Gauge Drains -Twist Drain - Automatic Pulse Drain - Pneumatic Division...

• Unbalanced poppet standard. • Solid control piston with lip seal • Non-rising adjusting knob. high by 1.65 inch (42mm) wide. • Easily serviced. • High Flow: 1/8" - 13 SCFM§ Standard part numbers shown bold. For other models refer to ordering Information below. NOTE: 1.218 Dia. (31mm) hole required for panel mounting. § SCFM = Standard cubic feet per minute at 100 PSIG inlet, 90 PSIG no flow secondary setting and 10 PSIG pressure drop. Ordering Information NOTE: BOLD OPTIONS Port Size Gauge Port Gauge Port Gauge Port Pressure Range Without Gauge Yellow Knob Black Knob With Gauge Port Type Change...

• Lightweight plastic body. • Non-rising adjusting knob. • Solid control piston with lip seal for extended life. • Unbalanced poppet standard. • Two full flow 1/8" gauge ports. • Reverse flow capability. • High Flow: 1/8" - 18 SCFM§ Standard part numbers shown bold. For other models refer to ordering Information below. NOTE: 1.218 Dia. (31mm) hole required for panel mounting. § SCFM = Standard cubic feet per minute at 100 PSIG inlet, 90 PSIG no flow secondary setting and 10 PSIG pressure drop. Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed maximum...

Technical Information Relief And Flow Characteristics Relief And Flow Characteristics Flow - SCFM Regulator Kits and Accessories Operating Pressure Range - PSIG bar 15 PSIG Spring Minimum 1 0.07 30 PSIG Spring Minimum 6 0.4 60 PSIG Spring Minimum 6 0.4 110 PSIG Spring Minimum 6 0.4 Pneumatic Division Richland, Michigan

P3A-W Regulators - Miniature (Water Service) • Lightweight plastic body. • Constructed of F.D.A. listed materials. • Unbalanced poppet standard. • Non-rising adjusting knob. • Compact, 2.96 inch (75mm) high by • Rolling diaphragm for superior performance and life. Standard part numbers shown bold. For other models refer to ordering Information below. NOTE: 1.218 Dia. (31mm) hole required for panel mounting. Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed maximum primary pressure rating. Ordering Information Without Gauge NOTE: BOLD OPTIONS ARE...

• Unique balanced poppet valve minimizes secondary pressure fluctuations. • Solid control piston with resilient seat for service-free • Non-rising "locking" adjusting knob. • Compact, 3.30 inch (84mm) high by • Easily serviced. Standard part numbers shown bold. For other models refer to ordering Information below. NOTE: 1.218 Dia. (31mm) hole required for panel mounting. § SCFM = Standard cubic feet per minute at 100 PSIG inlet, 90 PSIG no flow secondary setting and 10 PSIG pressure drop. Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed maximum...