High Pressure Continuous clean, oil free and dry compressed air Any moisture or water vapour can cause serious problems for systems using compressed air as it forms condensate Pressure drop Blocked valves Corroded piping Frozen pipes Equipment failure Increased maintenance costs The Parker domnick hunter five stage high pressure (HP) compressed air purification system provides a continuous supply of clean, oil-free and dry compressed air at a maximum working pressure of 276 bar g. Parker domnick hunter has been supplying its market leading compressed air purification products to defence organisations for over 40 years. The HP package is in service throughout the Royal Navy Surface Fleet. Contact Information: domnick hunter Industrial Division Dukesway, Team Valley Trading Estate Gateshead, Tyne and Wear Email: [email protected] • Efficient removal of water vapour from compressed air • Delivered air quality in accordance international standard for air quality • Fully automatic operation • Runs off ship system or shore air • Improves operational efficiency and reduces maintenance costs and • Constant dewpoint performance • High efficiency inlet and outlet filtration • Electric controls as standard • Fully corrosion protected inside • A smaller, more compact • Suitable for bulkhead, wall or deck • Easy to install and maintain ENGINEERING YOUR SUCCESS.

Technical Data NOTE: Heat Regenerative versions with PLC Controllers now available. Normal Operation High Pressure Compressed Air Dryer A high efficiency water separator removes bulk contamination from the air stream by vortex action. 90% condensate and aerosol removal at 21 °C. 80% particulate removal of 10 microns and above. An automatic drain removes any condensate present. A high efficiency coalescing filter removes oil/water aerosols down to 0.01 mg/m3 at 21 °C and dirt particulate down to 0.01 micron. An automatic drain removes any condensate remaining. A regenerative desiccant dryer removes...