SMART BUILDING SMART INDUSTRY Remote Temperature – 2x Probes The Remote Temperature – 2x Probes is dedicated to temperature measurements in buildings, and transmits data over a public or private LoRaWAN® radio network. APPLICATIONS ▪ Industrial processes: monitoring of equipment and water piping temperatures. ▪ Maintenance of building equipment (residential, tertiary): monitoring of the domestic hot water (DHW) system, supervision of heating installations. ▪ Indoor or outdoor environment. BENEFITS & FEATURES ▪ LoRaWAN®, Class A ▪ Easy to install and use ▪ 2 remote temperature probes; IPx7 waterproof probe; stainless steel tip for better reactivity; diameter less than 6mm, blue and red colour markings. ▪ Waterproof for protected indoor or outdoor environments ▪ 12 years of autonomy. CERTIFICATION ▪ RED, RoHS Sensors delivered without WATTECO marking The Remote Temperature – 2x Probes sensor allows remote temperature reading at two points in a boiler room, DHW production, cooling tower or cold room installation. The sensors can be placed against the pipes (and insulated with insulating tape) or inserted in the immersion sleeve. Data transmission over the public or private LoRaWAN® network is done periodically or immediately in case of alert when the minimum or maximum temperature threshold is exceeded. Powered by a 3.6V/3600mAh battery, the autonomy of the used is up to 12 years, with 1 transmission every 2 hours. By default, the sensor is configured for batch mode reporting of the temperature of probe 1 and probe 2 every hour with a measurement every 10 minutes. The battery voltage level is monitored and remotely updated every 7 days. Installation and commissioning are quick and easy. The sensor is equipped with: - a switch (ILS) used for activation or deactivation, - LEDs to monitor the configuration and pairing to the network. Each sensor is identified by a QR code on the label and an NFC tag inside the housing. THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT WATTECO is a European leader in the design and manufacture of smart IoT devices to suit all remote reading and data collection solutions. WATTECO is a LoRa Alliance® member. ©WATTECO - 6 rue Gutenberg, ZI Kerandré , CS30001, 56702 Hennebont, France - Tel: +33 2 97 85 67 65 For more information, contact us: info@w

Remote Temperature – 2x Probes TECHNICAL DATA Frequency Transmit power Measurement periodicity From 10 minutes to 24 hours (configurable) Transmission interval Immediate following measurement or batch at 30min to 48hrs (configurable) Data compression By differential coding (configurable) Activation method Activation by Personalization (ABP) or Over-The-Air Activation (OTAA) Data encryption TEMPERATURE MEASUREMENT ±0.2°C in the range from +6°C to +97°C ±0.5°C in the range from -15°C to +5°C ± 1°C in the extended range from -30°C to -16°C Otherwise ± 1.5°C Resolution (in nominal range) ALERTS Temperature...