MONIT’O
2Pages

SMART METERING SMART INDUSTRY MONIT’O MONIT’O offers 2 analog inputs isolated from each other allowing the measurement of voltage, 0-100mVolts and 070Volts. The measurements are transmitted periodically on the LoRaWAN® network. APPLICATIONS  Battery voltage monitoring  Battery current monitoring (shunt not supplied)  Rectifier monitoring for cathodic protection LoRaWAN®, Class A Easy to use and deploy Battery-powered device 2x analog inputs : 0-70V & 0-100mV More than 10 years autonomy depending on configuration IP55 QUALITY & RELIABILITY  RED, RoHS MONIT’O offers solution to remotely monitor batteries: • with its 0-70Volts input measures battery output voltage (12V, 24V, 48V). with its 0-100mV input measures a voltage produced across a 100 Ohm shunt through which the battery current flows. The remote application calculates the current by ohm's law. MONIT’O allows the monitoring of the electrical quantities voltage and current delivered by a cathodic protection rectifier: • 0-70V input for voltage measurement. The measured data can be stored in local memory and compressed before being transmitted over the LoRaWAN® public or private network. This technique considerably reduces the amount of data transmitted while preserving the autonomy of the sensor. MONIT'O runs on a 3.6V/3.6Ah Lithium battery, the autonomy of the sensor is 12 years with 1 measurement and 1 transmission per day, default configuration. For a configuration performing a measurement every 10 minutes and a transmission every hour the autonomy is 6 to 7 years. 0-100 mV input for voltage measurement on 100 Ohm shunt. THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT WATTECO is a European leader in the design and manufacture of intelligent IoT devices to fit to all remote reading and data collection solutions. WATTECO is a LoRa Alliance® member. WATTECO - 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: +33 2 97 85 67 65 For more information, contact us: inf

MONIT’O TECHNICAL CHARACTERISTICS RADIOFREQUENCY FIRMWARE LoRaWAN®, Class A. Activation method Activation by Personalization (ABP) or Over-The-Air Activation (OTAA) Data encryption Application layer ZCL (ZigBee Cluster Library) – to be interpreted by the remote server Measurements & Transmission cycles Configurable from 10min to 24 hours Data compression 2 conductors (1 pair) 20-26 AWG stranded 1,5m lenght 2 conductors (1 pair) 20-26 AWG stranded 1,5m lenght Common mode voltage > 70 Volts Galvanic insulation Accuracy Resolution POWER SUPPLY Voltage 3,6V / 3600mAh – not replaceable lithium...