Inclin'O
2Pages

SMART INDUSTRY INCLIN'O The INCLIN'O sensor measures the inclination of an equipment compared to an original position (set at start-up and stored in flash). For example, INCLIN'O detects a change in position to warn about a falling pole or an open window via a LoRaWAN® network INCLIN’O can also monitor shock events and report the shock amplitude vector, this configuration is not available by default and needs a specific configuration (config ref 36-70-201-000) Roof window monitoring Tilt detection Shock detection * Electricity, telecom or CCTV poles monitoring LoRaWAN®, Class A Easy to use and deploy Tilt • Range: 0…180° from vertical • Periodic measurement Shock * • Range: ±16g ( • Threshold: 1,1g on each axis • Standby sample frequency: 100Hz > 10 years autonomy (Tilt configuration only with measurement period of 10s / 1 frame per day) IP68 QUALITY & RELIABILITY • RED, UKCA, RoHS INCLIN'O is an autonomous LoRaWAN® IoT device. It monitors the inclination of the equipment on which it is installed. After a measurement if a tilt threshold is passed (over 40° or below 10°), it sends an alert immediately. INCLIN’O can also monitor shock events and report them upon detection based on a threshold (with config ref 36-70-201-000). Later detection are combined in a batch frame sent 3 minutes after the first detection. Battery powered, the sensor has a lifespan of over 10 years when configured with a position check every 10 seconds and one radio transmission per day. INCLIN'O can be attached using: INCLIN'O is suitable for outdoor installations thanks to its IP68 enclosure and its anti-UV treated material. Installation and commissioning are quick and easy. INCLIN'O is equipped with: • a magnetic switch for activation or deactivation; an NFC identification tag (product code, serial number, batch number). INCLIN'O is delivered with a default configuration that can be reconfigured using the downlink, according to its ZCL application layer, for example: interval between two tilt checks; threshold of alert "opening", "re-closing"; threshold of alert for shock detection * magnets (option), number of confirmations before alert; a pole mounting bracket (option), periodicity on life frame. an adhesive strip (default configuration). * (with config ref 36-70-201-000) THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT WATTECO is a European leader in the design and manufacture of smart IoT devices to suit all remote reading and data collection solutions. WATTECO is a LoRa Alliance® member. ©WATTECO - 6 rue Gutenberg, ZI Kerandré , CS30001, 56702 Hennebont, France - Tel: +33 2 97 85 67 65

INCLIN'O TECHNICAL DATA RADIOFREQUENCY Activation method Activation by Personalization (ABP) or Over-The-Air Activation (OTAA) Data encryption Application layer ZCL (ZigBee Cluster Library) – to be interpreted by the remote server Measurement cycles From 1s to 59s in 1s steps Or from 1min to 59min in 1min steps Default: 10 seconds (24h with config ref 36-70-201-000) Shock sampling frequency: 100Hz * (from 1Hz (~10µA consumption) up to 5376Hz (~200µA)) Transmission cycles Configurable from 10 minutes to 24 hours / Upon shock event detection* Alarm thresholds Opening: configurable in the...