SILICONE HEATERS component parts

SILICONE HEATERS component parts WATTCO™ silicone rubber heaters are composed of fiberglass enhanced silicone rubbers that are moisture and chemical resistant. Thin and flexible, these heaters are designed to meet the requirements of various low and medium temperature applications that require irregular shapes, sizes, and dimensions. SILICONE RUBBER HEATERS LEAD WIRE MODELS WATTCO™ silicone heaters come with lead wire terminations. Two models are currently available: Teflon and silicone lead wires. Teflon lead wires: • Placed between the silicone layers • A little patch is added on the exit point...

SILICONE HEATERS component parts FIG. 2 - Graph of Watt Density vs Attachment Methods FASTENING METHODS • For solid attachment to application surfaces, use room temperature adhesive pastes. • Available in RTV 106 (red) and RTV 116 (transparent). • RTV 106 and RTV 116 are suitable for high temperatures of up to 500°F. APPLICATION TEMPERATURE WATT DENSITY VERSUS ATTACHMENT METHOD PRESSURE SENSITIVE ADHESIVES • Thin layer of adhesive backing for high temperature (300°F). • Made for all surfaces. • Include an easy-to-remove protective cover. • Watt density: 5 W/in² and less if used with a PSA. FACTORY...

SILICONE HEATERS WATTCO™ silicone barrel heaters are designed to brace a drum and are easy to install and remove. They are primarily used for pre-heating solutions in drums or pails in order to make them more fluid and flowable. Silicone barrel heaters are the ideal solution for heating liquids in pouring, dipping, coating, and mixing applications. Silicone rubber shell Fiberglass grid to reinforce the silicone rubber sheets Electrically grounded Electrical resistant wire web and protective metallic grid inserted between the silicone layers included • B-200 bimetal thermostat (400°F) included...