Website:
WATTCO
Catalog excerpts
Over 40 years experience manufacturing Specialized Electric Heating Elements 55 Milton Ave., Lachine, QC H8R 1K6, Canada
Open the catalog to page 1
Manufacturer of Electric Heating Elements and Controls Over 40 years experience manufacturing Specialized Electric Heating Elements IMMERSION HEATERS CIRCULATION HEATERS OVERVIEW Circulation heaters from WATTCO™ are the perfect solution for generating heat and further enhancing immersion heaters performance. Circulation heaters are composed of all in one units with a heater mounted inside an insulated tank. Circulation heaters have inlet and outlet piping where the liquid or gas goes through the tank in order to reach the desired temperature. Standard sizes: 1.25” NPT screwplug size to 18”...
Open the catalog to page 2
IMMERSION HEATERS FLANGE HEATERS OVERVIEW Flange heaters from WATTCO™ are primarily made using hairpin or bugle bent tubular elements made from copper, steel, stainless, incoloy® inconel®, or titanium sheathed elements that are welded or silver-brazed into a pipe or steel flange. Flange heaters are designed to be mounted in tanks and pressurized vessels, WATTCO™ flange heaters are used for heating liquid mediums or other specific types of liquids [water, oil, heat transfer fluid, and corrosive solutions], and for heating gases (steam, vapors etc). Standard flange heaters: ½” to 44” sizes....
Open the catalog to page 3
TUBULAR HEATERS TUBULAR HEATERS OVERVIEW Tubular heating elements from WATTCO™ are the most versatile and the best suited solutions to a large number of applications. Tubular Heating elements from WATTCO™ are factory configured to almost any shape or size Custom bending diameters can be made upon request. Tubular elements can be: MM MM Clamped Immersed Cast into metal Standard diameters: 0.260”, 0.315”, 0.375”, 0.430”, 0.475” and 0.625” Available in a broad variety of sheaths, diameters and ratings Supplied with electrically isolated sheath Provide superior internal electrical insulation...
Open the catalog to page 4All WATTCO catalogs and technical brochures
-
CARTRIDGE HEATERS6 Pages
-
SILICONE HEATERS4 Pages
-
Tubular_Heaters13 Pages
-
Over_The_Side_Heaters5 Pages
-
Screw_Plug_Heaters12 Pages
-
BAND HEATERS7 Pages
-
Immersion Heaters4 Pages
-
INFRARED RADIANT HEATERS11 Pages
-
CONTROL PANELS13 Pages
-
DUCT HEATERS6 Pages
-
OPEN COIL ELEMENTS3 Pages
-
SILICONE RUBBER HEATERS4 Pages
-
BAND HEATERS7 Pages
-
CARTRIDGE HEATERS8 Pages
-
FINNED STRIP HEATERS8 Pages
-
STRIP HEATERS8 Pages
-
FINNED TUBULAR HEATING13 Pages
-
TUBULAR HEATERS13 Pages
-
PIPE HEATER3 Pages
-
OVER THE SIDE HEATERS5 Pages
-
SCREW PLUG HEATERS12 Pages
-
Flanged Heaters Catalogue19 Pages
-
Inline Heaters13 Pages
-
Circulation Heaters Catalogue13 Pages