BREDEL HEAVY DUTY HOSE PUMPS
11Pages

{{requestButtons}}

Catalog excerpts

BREDEL HEAVY DUTY HOSE PUMPS - 1

BREDEL HEAVY DUTY HOSE PUMPS

Open the catalog to page 1
BREDEL HEAVY DUTY HOSE PUMPS - 2

Good News... a pump with no seals or valves to wear, clog, or leak Save time and money Chemical Corrosive acids and bases Water and Waste Treatment Today Bredel has more than 100,000 peristaltic pumps working non-stop around the globe. With operating pressures up to 16 bar and flow rates up to approximately 100 cubic metres/hour, Bredel hose pumps save time and money by successfully handling the toughest applications in a broad range of industries. Lime, kalic, sodium hypochlorite, ferric chloride and sludges • No ancillary equipment, check valves or sealing water flush systems Bredel is...

Open the catalog to page 2
BREDEL HEAVY DUTY HOSE PUMPS - 3

Bredel 10, Bredel 15, Bredel 20 Performance kP kP a a Max flow: 525 litre/hour Capacity: 0.083 litre/rev Max discharge pressure: 12 bar Max temperature: 80C Inner diameter pump element: 15mm Lubricant required: 0.5 litres Starting torque: 60 Nm Required motor power kW Required motor power 0.45 kW 0.40 Max flow: 820 litre/hour Capacity: 0.152 litre/rev Max discharge pressure: 10 bar Max temperature: 80C Inner diameter pump element: 20mm Lubricant required: 0.5 litres Starting torque: 85 Nm Note: The area of continuous operation diminishes with increased product temperatures. For product...

Open the catalog to page 3
BREDEL HEAVY DUTY HOSE PUMPS - 4

Bredel 25, Bredel 32 Dimensions Max flow: 2,740 litre/hour Capacity: 0.300 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 25mm Lubricant required: 2 litres Starting torque: 115 Nm Required motor power kW 1.5 Pump speed rpm Capacity L/h Required motor power kW 2.5 kP Max flow: 5,250 litre/hour Capacity: 0.625 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 32mm Lubricant required: 3.5 litres Starting torque: 210 Nm Continuous Duty Intermittent Duty (maximum 2 hours of operation followed by a minimum 1 hour...

Open the catalog to page 4
BREDEL HEAVY DUTY HOSE PUMPS - 5

Bredel 40, Bredel 50 Performance Dimensions Note: measurements in mm Max flow: 9,600 litre/hour Capacity: 1.33 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 40mm Lubricant required: 5 litres Starting torque: 320 Nm Required motor power kW 3.0 Required motor power kW 7.0 16 Max flow: 17,500 litre/hour Capacity: 2.92 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 50mm Lubricant required: 10 litres Starting torque: 620 Nm Pump speed rpm Capacity L/h Continuous Duty Intermittent Duty (maximum 2 hours of...

Open the catalog to page 5
BREDEL HEAVY DUTY HOSE PUMPS - 6

Bredel 65, Bredel 80, Bredel 100 Performance Max flow: 32,200 litre/hour Capacity: 6.7 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 65mm Lubricant required: 20 litres Starting torque: 1150 Nm Required motor power kW 11.0 00 Dimensions Product temperature C Required motor power kW 14.0 75 Max flow: 39,100 litre/hour Capacity: 11.7 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 80mm Lubricant required: 40 litres Starting torque: 2000 Nm Required motor power kW 18.0 00 Max flow: 52,900 litre/hour...

Open the catalog to page 6
BREDEL HEAVY DUTY HOSE PUMPS - 7

Bredel 280, Bredel 2100 Performance Dimensions Note: measurements in mm Max flow: 78,000 litre/hour Capacity: 23.4 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 80mm Lubricant required: 80 litres Starting torque: 3,400 Nm Required motor power kW 28.0 kP Required motor power kW 36.0 00 Max flow: 108,000 litre/hour Capacity: 40 litre/rev Max discharge pressure: 16 bar Max temperature: 80C Inner diameter pump element: 100mm Lubricant required: 120 litres Starting torque: 5,300 Nm Type Bredel 280 Bredel 2100 *This dimension will vary depending on...

Open the catalog to page 7
BREDEL HEAVY DUTY HOSE PUMPS - 8

DuCoNite – the answer for aggressive liquids DuCoNite Chemical Duty Protection The DuCoNite pump is used for the most challenging applications. A high-tech surfaceprotection method has rendered the pump ultraresistant to aggressive liquids. The DuCoNite hose pumps are available in five pump sizes – with capacities up to 5,250 litre/hour and pressures up to 16 bar. Developed and tested by Bredel in conjunction with expert metallurgists, DuCoNite is a three step metallic surface treatment process with proven excellent chemical resistance to a myriad of chemicals, including many of the common...

Open the catalog to page 8
BREDEL HEAVY DUTY HOSE PUMPS - 9

Clean-In-Place: Bredel CIP 40, Bredel CIP 50 Performance Dimensions Note: measurements in mm Required motor power kW 3.0 Max flow: 4,800 litre/hour Capacity: 1.33 litre/rev Max discharge pressure: 16 bar I nner diameter pump element: 40mm Lubricant required: 10 litres M inimum starting torque: 320 Nm Required motor power kW 7.0 Max flow: 8,500 litre/hour Capacity: 2.92 litre/rev Max discharge pressure: 16 bar Inner diameter pump element: 50mm Lubricant required: 20 litres M inimum starting torque: 620 Nm Features of CIP Pumps Recommended for sanitary processes, or other applications...

Open the catalog to page 9
BREDEL HEAVY DUTY HOSE PUMPS - 10

Hose options The hose is the key The machined hose is the single most vital component for the performance, durability, and efficiency of the hose pump. To ensure perfect compression and consistent, reliable performance, Bredel manufactures hoses from high quality compounded rubbers, reinforced with four individual layers of braided nylon and finished by high precision machining. Perfect compression eliminates slip which, in other pumps, can destroy shear sensitive product, reduce metering accuracy, or allow abrasive slurries to wreak havoc on wetted parts. Bredel engineers hoses to meet the...

Open the catalog to page 10
BREDEL HEAVY DUTY HOSE PUMPS - 11

INDUSTRIAL SOLUTIONS Watson-Marlow Fluid Technology Group Watson-Marlow Fluid Technology Group supports its customers locally through an extensive global network of direct sales operations and distributors Copyright © 2020 Watson-Marlow Fluid Technology Group HB0412 ISSUE 12 The information contained in this document is believed to be correct at the time of publication, but Watson-Marlow Bredel BV accepts no liability for any error it contains, and reserves the right to alter specifications without prior notice. All mentioned values in this document are values under controlled circumstances...

Open the catalog to page 11

All Watson-Marlow Fluid Technology Group catalogs and technical brochures

  1. Tubing guide

    15 Pages

Archived catalogs

  1. 114 pumphead

    2 Pages

  2. SPX pump

    10 Pages

  3. Flexicon

    24 Pages

  4. OEM pumps

    16 Pages

  5. Hose pumps

    12 Pages