Fluid Delivery Heaters

Fluid Delivery Heaters Extended Capabilities for FREEFLEX® Heaters Watlow’s miniature heated polymeric tubing assemblies provide a flexible heat-up and transport system for moving fluids within diameters as small as V32 in. (0.8 mm). The FREEFLEX® heater heats fluids up to 212°F (100°C) and maintains temperature during transfer from a reservoir to a point of use. In some applications, the tubing can actually serve as the reservoir for limited volumes of fluid, helping to reduce start-up times. For higher temperatures, contact your Watlow representative. Watlow’s innovative design places the heating...

'Extended Capabhjt^ Fluid Delivery HeatersExtended Capabilities for FREEFLEX Heaters Technical DataWater Temperature Rise/Length Versus Flow Rate Versus Watt Density Water Temperature Rise °F/Foot Flow Rate (mL/minute) Water Temperature Rise °C/Meter Flow Rate (mL/minute) FREEFLEX Outside Diameter Temperature Versus Watts/Length 370

Fluid Delivery Heaters Extended Capability Extended Capabilities for FREEFLEX Heaters Typical Application Requirements When requesting a quote please specify: • Fluid type • Inlet temperature • Outlet temperature • Flow rate • Voltage - Typically less than 36V • Watts/ft - See chart on previous page for typical values • Maximum allowable outside surface Temperature • Tube size • 1/32 in. (0.8 mm) I.D. x 1/16 in. (1.6 mm) O.D. 1 • /16 in. (1.6 mm) I.D. x 1/8 in. (3.2 mm) O.D. 1 • /8 in. (3.2 mm) I.D. x 3/16 in. (4.8 mm) O.D. 3 • /16 in. (4.8 mm) I.D. x 1/4 in. (6 mm) O.D. • Other (specify size)...

Extended Capabilities for Syringe Heaters The Watlow syringe heater was developed to match the unique needs of medical injection applications. It produces consistent results by reducing temperature and viscosity variations. Fluid and drug delivery that maintain precise liquid temperatures and reduce fluid viscosity maximize patient comfort and reduce risk. Body temperature injections are more easily introduced, particularly for patients in a frail or distressed condition. The Watlow syringe heater is available in two configuration types with an optional, repeatable temperature sensing controller....

Fluid Delivery HeatersFLUENT® In-line Heaters Typical Applications • Hemodialysis fluid heating • Food cooking equipment • Semiconductor purge and carrier gas heating • Ink preheating systems • On-demand fluid heating Watlow’s FLUENT® in-line fluid heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around a tube as part of a thermal system. Watlow’s FLUENT heater is designed as an integrated solution that replaces multiple components in a system. This heater design reduces overall system cost and complexity. Because...