Technical Data Sheet Safety Shoes WR 5003 Description Safety shoes is made of Suede leather upper and its sole is dual density PU, the toe cap and midsole are made is steel. It’s toe cap to protect above 200Joules impact. Lightness, elasticity and shock resistance MD sole. Mesh nylon lining provide good air permeability and comfort. Materials Upper Full grain leather/Mesh Nylon mesh Dual Density Typical Application Approvals Certification body: Intertek – Labtest, Centre Court, Meridian Business Park, Leicester, LE19 1WD, UK (notified Body 0362). These products are classed as Personal Protective Equipment (PPE) BY THE European PPE Directive 89/686/EEC and have been shown to comply with this Directive through the European Standard: EN ISO 20345:2011 Safety Footwear & EN 12568:2010. This footwear is designed to minimize the risk of injury from the specific hazards as identified by the marking on the particular product (see marking codes). Performance and Limitations These products have been tested in accordance with EN ISO 20345:2011 for the types of protection defined on the product by the marking codes explained. However, always ensure that the footwear is suitable for the intended end use. Date of manufacture/date wheel Size of product Product identification The number and year of this European norm Category of protection offere