Data Sheet Safety Shoes Low ankle S900/S3 Description Warrior Safety shoes, black buffalo leather with removable moulded EVA insert, dual density PU injection. Materials Upper Leather Type Embossed buffalo leather Leather Thickness Outsole Type Dual density PU injection EVA with mesh Steel toe cap 200J EN 12568:2010 This footwear is designed to minimize the risk of injury from the specific hazards as identified by the marking on the particular product (see marking codes). Approvals Certification body: Intertek – Labtest, Centre Court, Meridian Business Park, Leicester, LE19 1WD, UK (notified Body 0362). These products are classed as Personal Protective Equipment (PPE) BY THE European PPE Directive 89/686/EEC and have been shown to comply with this Directive through the European Standard: EN ISO 20345:2011 Safety Footwear & EN 12568:2010. Typical Application These products have been tested in accordance with EN ISO 20345:2011 for the types of protection defined on the product by the marking codes explained. However, always ensure that the footwear is suitable for the intended end use. Comfort and Protection Toe cap resistant to 200 J Anti-perforation resistant to 1100 N Anti-static Water repellent upper Oil resistant sole Chemical resistant sole Slip resistant Heel energy absorption High quality leather Reflective Strip Date of manufacture/date wheel Size of product Product identification Number and year of this European norm Category of protection offered Warranty Six (6) months against manufacturing defects.