Technical Data Sheet Fiber Metal Helmet WR1016 Description WR1016 Provide full comfort and protect the head from injury due to falling objects, impact with other objects, debris, rain, thermal and electric shock. Features:  4-Point Suspension  Impact and crack resistance, thermal resistance, best rigidity  Heat resistance up to 200 degrees  Provides dielectric protection up to 2,200 volts.  Short brim for better upward visibility  LDPE cradle, Terylene harness, replaceable brow pad  Adjustable wheel ratchet  Chin strap is made of high quality elastic band with plastic chin guard Application Heavy and Light Industrial, Road Construction, Construction Work, Oil & Gas, Forestry, Mining and Automotive engineering Approvals Certification body: INSPEC International Ltd. No. 56 Leslie Hough Way, Salford, Greater Manchester M6 6AJ, England (Notified Body No. 0194) Comply with this Directive EN 397:1995. These products are classed as Personal Protective Equipment (PPE) by the European PPE Directive 89/686/EEC. Can be stored and transported in their original cartons at ambient temperature (0°C to 30°C) Do not store in direct/high heat or sunlight Materials Shell 4 Point LDPE cradle with Terylene harness LDPE (Low Density Polyethylene) Brushed Nylon with 2mm foam 54-62 cm White, Red, Yellow, Blue, Green, Olive Green Clean using warm soapy water and soft cloth Do not use solvents or abrasives Packing 20 Pieces per Carton Gross Weight: 10.5 kgs and Net Weight: 8.5 kgs Measurement: 56*45